adjustable feednecks?

[phantomhitman]

wow 3 quick responses. i like the looks of the rogue neck but i have one main question. how does it tighten and stay locked? I mean I assume you turn the top of it until the loaders sits tightly in the base, but after that is there a way to lock it down? Or is there enough grip to keep it locked in while a run, slide, fall over and down hills, etc? I jsut do not see how the rogue would stay tightened without a system that keeps it from unscrewing . i know i am a tard, but at least I am trying to find the best of what is out there.

no rise-i really meant to say lo rise. i have been looking at ccm's website and just got the words mixed up.
would a halo or egg function properly with a lo rise? or would i have to buy another feedneck after i finally get a halo?! how does the halo and egg handle with the rogueneck?

thanks very much for everyones help, this marker is coming together as fast as I can get the money, or as fat as you guys helping me spend it .

[pb4jc]

egg II/Halo

I had the same question for rogue about the feednecks of the halo and eggII not fitting in there and he and fragtek both told me that the manual from both of the factories say that it is meant to be sanded. I did and it works very well now.

The RogueNeck doesn't have anything to keep it from unscrewing but i can almost garuntee that it won't once you screw it down around the feedneck it sits there nice and tight. I even tried to pull mine out once while it was screwed down, i couldn't

One thing i would recomend doing if you buy the RogueNeck is taking the outside part of before screwing it into the gun i didn't do that and ended up having some difficulty unscrewing the outer part when i went to put the eggII in there. again just my $0.02

[spantol]

Re: Phantom

CCM does indeed make Angel-threaded no-rises, though they are currently out of stock.

http://www.chipleymachine.com/angel.htm

Originally posted by Magglerock
Remeber though, you won't be able to get a no-rise from CCM, only a low-rise, as they make them for angles, and angles don't work well with no-rises. If you're running a Halo, you'll want the no-rise; they feed better with a shorter stack. I have a brand new A+ paintball no-rise clamping neck for sale; its still in the package. Its black. PM me if you want it.

[Magglerock]

The Chipley

site says they only make a lo and a hi rise; I don't see anything about a no rise.

[sslecyk03]

"We are currently out of stock of the "mid- and no-rise" feednecks for the Angel. We should have more soon."


they have them they are just sold out. They come in no rise, low rise, mid rise, and high rise.

[RoadDawg]

Originally posted by phantomhitman
wow 3 quick responses. i like the looks of the rogue neck but i have one main question. how does it tighten and stay locked? I mean I assume you turn the top of it until the loaders sits tightly in the base, but after that is there a way to lock it down? Or is there enough grip to keep it locked in while a run, slide, fall over and down hills, etc? I jsut do not see how the rogue would stay tightened without a system that keeps it from unscrewing . i know i am a tard, but at least I am trying to find the best of what is out there.

no rise-i really meant to say lo rise. i have been looking at ccm's website and just got the words mixed up.
would a halo or egg function properly with a lo rise? or would i have to buy another feedneck after i finally get a halo?! how does the halo and egg handle with the rogueneck?

thanks very much for everyones help, this marker is coming together as fast as I can get the money, or as fat as you guys helping me spend it .

It is just like any other screw on your marker. The tighter it is the less likely it'll come off. As long as it is clamped it won't come loose. The Halo handles nicely once it is sanded to fit. I'll be speaking on the Egg 2 neck in a bit. So to answer your question. The tighter you clamp the less the hopper will come out. I've used it and abused mine. No problems of unscrewing or anything. If you care to ask more on it AIM me @ AIM: phenom0906 I'd be more then happy to answer your questions.

[angelbeast24]

the chock chain sucks mine broke n srtacted get the ccm

[headcase]

I have both a no-rise CCM and a lowrise CCM(for my Karta and my Dallara in that order.) I test fitted both feednecks before the markers went out for anno, and they both fit great.

I personally perfer the necks that have a screw to tighten over the twisting type, I have had a Demonic Strangler, and another type(don't remember which brand) and neither worked to my satisaction.

Also, to my eye, the twist ones just look bulky to me.

[barberjohn]

my rogueneck is great. it stays tightened when tightened, yet sometimes i have trouble with the whole feedneck coming undon when i try to untighten it, but im sure some locktight will fix that. it also sits really low on your gun, and my eggo is like an inch apart from the back of my mag, which makes for a small and sweet package.

[phantomhitman]

thanks for the info gentlemen. i am kind if like you headcase, i like to tighten the screws better than the neck. i am trying to find out where i can get a ccm bc they seem to be sold out everywhere.

[melster]

Well, I prefer the CCM, because with the allen screw, it tightens down really well. The rogueneck doesn't clamp down as well. I don't know if it's because the cuts in the strangler aren't big enough or something else, but it just doesn't. I even used a strap wrench, but my halo would rock back and forth ever so slightly until you could pull it off.

Mind you, I sanded my halo's neck but it still fit snug to the rogueneck enough that it was almost a friction fit. The whole strangler concept is just flawed, imo. The only way for it to work effectively is if you could make the threads taper inwards on the collar.

[phantomhitman]

either that or make it lock down somehow. maybe using an intergrated allen screw that way you tighten it down, then screw the allen screw in to secure it from unscrewing.
if i can find a ccm i will get it. if not i am talking to rogue asap

[logamus]

Originally posted by sslecyk03
"We are currently out of stock of the "mid- and no-rise" feednecks for the Angel. We should have more soon."


they have them they are just sold out. They come in no rise, low rise, mid rise, and high rise.

they have been sold out of the no-rise for over 2 months now.

[Halliday]

Does anybody have a pic of all the diff feednecks neck to each other? To compare them Or pix with hoppers in the feednecks?

[melster]

Originally posted by phantomhitman

if i can find a ccm i will get it. if not i am talking to rogue asap

I'll sell you my CCM if you want. Just got it from toolbott this week. I decided I wanted a black one so I ordered it from CCM.

I could also sell you my Rogueneck if you prefer that.

Both HARDLY used. The Rogueneck was used for a day. Looks absolutely new. The CCM, I got used, but it has NO scratches. However, it DOES have that problem I mentioned above. I'll let the Rogueneck go for $20 and the CCM for $25 shipped to the lower 48.

Heh...maybe this should go in the classifieds...