ace

[emag68]

can u use the ace eye on a emag

[Snertz]

Yes you can, you just need to mill the top of the grip frame for it, drill the holes through the body, and get the board flashed with new firmware. Kinda long process actually..

[barberjohn]

lots of work but it is possible. already i think there are 3 emags on ao that have this done to it.

[coolcatpete]

Make that 4. Mine is in the shop getting ACE at this very second.
Pete

[angelbeast24]

talk to bajaboy hes my teamate and was the 3rd person to fully put an ace in his emag by himself

[emag68]

how much does it cost and where do i get it from

[p8ntball1016]

Emag68, if you don't have one, buy a level 10 bolt. You won't need the ACE.

[emag68]

i got a lvl 10 it still breaks paint

[p8ntball1016]

Originally posted by emag68
i got a lvl 10 it still breaks paint

You may have to fiddle with it a little to get it to work right. If you haven't tried that already.

[barberjohn]

there is a whole thread about how to tune your lvl 10 in the tech forum, try looking there and see if that helps.

[emag68]

thanks alot everyone

[joshweinerhead]

if you interested in getting your fun ace'd talk to Tunaman he can help you out .. also guys there are alot more then 4 aced emags now .. its the new fad

[Skoad]

im not certain on this but if you have a ULE emag gripframe i think it is already pre-milled.

When i look at the top of mine it seems to have a tray, with a screw hole, already threaded that nothing goes into. Also i think it has a hole milled in the side of the frame for the switch already.

So if you have a ule grip i don't think it'll be much trouble to get the rail milled and body cut.

oh and here's where you buy it - http://store.airgun.com/index.cfm?ac...5&categoryID=0

[emag68]

where do u get the ule grip from
and how much is that

[Vendetta]

I haven't turned mine on on my x-mag. Save your money and buy yourself a Halo. That and a Level 10 is all you need.