my mag

[bedspread]

now back to my mag

the parts i need is number 30 and 31
according to what punkncat told me

where can i get them off the shelf in ga

[ramennoodles]

lack of details over whelming....can't hold on much longer!!!!
i assume your talking about the corrosponding numbers of parts as seen on an exploded mag picture/poster?

[bedspread]

being this is the mag support page i assumed u guys would have figured that much out without help

but yes you are right they are parts numbers

[abarnhar]

Friendly fella ain't ya?

[bedspread]

still kinda ticked off about team nonuts f-ing with me

didnt mean to offend this time.
i realy want to get this pos working right.

it works now but i have to play in the front to reach ppl cause i cant get the speed up with out leaking from the VA

[GA Devil]

Originally posted by bedspread
being this is the mag support page i assumed u guys would have figured that much out without help

but yes you are right they are parts numbers

Actually this isnt the tech area. This is paintball talk. But anyway, how do you know for sure those are the parts you need? Not totally doubting just curious. Is this a classic or an rt?

[bedspread]

its so old it doesn't even say classic

it's a 68 automag.
lol
i think i got ripped off

i trust the guy that told what part it was

he fixed an air techs f-up on an rt mag


oh check this u'll like this story
my friend paintninja won an rt/x mag from a game. it came with the lvl 10 ,but there was a box of parts for the lvl 10 the extra carriers and such,well being that ninja had never owned a mag (or any of the rest of us at the time )he thought that the parts kit was the lvl 10 and he had to get it installed. so he took it to paintball supplies in stockbridge ga to have it installed.Well Jay charged him $100 to put it in ,when he got it back it was trash u couldn't hook air up to it without leaking,it might have had 50 feet range on it and was gernaerly f-ed up.
so he decided to let punkncat look at it.he tore it apart put it back .then called agd to send it back
come to find out the rt/x already had the lvl 10 installed and tuned from the factory. well he did some fiddleing with it and got it to work it works so good he traded a baddass genx 3 autococker for it (bad trade for him if u ask me).

that is why i dont recomend anyone going to paintball supplies for anything other than paint ,and that should only be done if wall mart is out.

oh and jay at the shop kept all the extra parts to ninja's gun too

[ramennoodles]

Originally posted by bedspread
and that should only be done if wall mart is out.

heh, that gave me a chuckle.

[TheDoveDecends]

Originally posted by bedspread
being this is the mag support page i assumed u guys would have figured that much out without help

but yes you are right they are parts numbers

jesus... nice attitude pal. why dont you try being a little more friendly.

[bedspread]

plz read the whole thread before replying

[f3rr3+]

hmmm.... be MUCH more specific and do a search, if that doesnt work send it to AGD and they will get ya set up, you can also check tom's tech tips to see how to set up your lvl 10

[punkncat]

I am by no means "supertech" but I think that the "spring pack" , the black rings piled together in the back of the reg , are what is causing the problem.
The marker works fine until you try and get over around 260FPS velocity, and it starts venting from the rear.

Bed, try and take it easy here bro.These are good folks.Loads of good information to be had here.
I might also suggest sending the marker to Cphillip if his offer still stands.He is quite familiar with them and free other than shipping is a great offer.

[SlartyBartFast]

Originally posted by punkncat
Bed, try and take it easy here bro.These are good folks.Loads of good information to be had here.

Good advice. What you've done Bed is the equivalent of walking up to a pic-nic table at a paintball event and rudely announced: "You guys have mags, fix this."

If you want good help without paying for it you've got to show a good attitude. There are too many nice and friendly people to help before it's worth considering the ones with bad attitudes.

[member#10,261]

B is a good guy, he just got off to a bad start with "us".

You can order any part you will ever need direct from the factory, but I reccomend Tunaman (online dealer here on AO)

AirGunDesigns:

http://store.airgun.com/

more spicificaly-
--parts--

http://store.airgun.com/index.cfm?action=cat.catalog&categoryID=8

--classic valve parts--

http://store.airgun.com/index.cfm?action=cat.catalog&categoryID=18

TunaMart:

http://www.tunamart.com/

just e-mail Rob and he will give you his prices


As for "off the shelf" in GA...I have no idea. I guess you can check your local shop, then field, then the next closest shop and field and so on untill you find what you are looking for. I know my local shop (GO PEVS) will order ANYTHING the customer needs. So you may try just asking them to order the parts for you.

Hope I Helped,
M

[InexactMelissa]

I wasn't able to find a pn 30 or 31, but if you want the spring pack, it's not expensive:
spring pack

or the regulator piston assembly, also not expensive:
reg piston