Clear Grips!

[ralicea]

bunkerking...that little thingie is visible also with the stock grips...its just more obvious with the clear grips.

[headcase]

Hey Load---did you ever find some flat head screws that will work?

Later
SSDD

[Load SM5]

Not yet. They did'nt have the right kind in the small hardware store down the street where theyr're used to me dragging my fully assembled paintball gun inside. I'm going to have to break my gun down to just the grip to take it over to Lowe's and Home Depot. Otherwise I may cause a bit of a scene.

[davej946]

Originally posted by Load SM5
Not yet. They did'nt have the right kind in the small hardware store down the street where theyr're used to me dragging my fully assembled paintball gun inside. I'm going to have to break my gun down to just the grip to take it over to Lowe's and Home Depot. Other\wise I may cause a bit of a scene.

LOL! No joke. I walked into Home Depot near my house with just my iFrame and that still caused a bit of a hassle!

Later,

[RiceRocket]

ralicea or other beta testers,

Give us the lowdown on how they perform when you after you get a chance to play with them. Let us know if they get slippery or scratched up easily.

Thanks

[bunkerking]

Originally posted by ralicea
bunkerking...that little thingie is visible also with the stock grips...its just more obvious with the clear grips.

Oh, see, I did not know that, thank you for pointing that out.

[Load SM5]

Originally posted by RiceRocket
ralicea or other beta testers,

Give us the lowdown on how they perform when you after you get a chance to play with them. Let us know if they get slippery or scratched up easily.

Thanks

Manny-

I'll be running them through the paces this weekend. I'll wet them down a bit and play with them and see if they get slick. I'll report on scratches and any problems Sunday.

[ralicea]

I'll be playing tomorrow and will post afterwards.

[ralicea]

I tried them today and they were great as long as you have gloves on. Without gloves they felt hard and could not get a good grip. I got shot on the marker and got paint all over my hand and grip, but paint did not get into the grip's electronics. It would take a direct shot on the trigger frame to get paint into the electronics, but that would be the same with any other electronic marker.

Thanks a lot Jeff...BTW, let me know if you will be selling more. There was a guy at the field that wanted a pair.

[Smokee_2_7]

Hey jeff, as of right this minute im still in mobile. in about 2 hours, ill be on my way back up. I will be out at NAP on saturday. (dont know if ill be reffing of playing just yet. . . ) Anyway, Ill have my z-grip with me, if you can make it out.


Carl.

[paintballer187]

nice grips

[Load SM5]

Originally posted by Smokee_2_7
Hey jeff, as of right this minute im still in mobile. in about 2 hours, ill be on my way back up. I will be out at NAP on saturday. (dont know if ill be reffing of playing just yet. . . ) Anyway, Ill have my z-grip with me, if you can make it out.


Carl.

I should be there, if the weather does'nt suck.

[gmag]

Forget the grips....thats a nice MARKER!!!

[Russ]

Here's a link to www.mscdirect.com an industrial supplier. I have bought boxes of 100 stainless steel screws, in various sizes from them (set screws to fill in the sight rail holes, front trigger frame screws, etc, etc.) A box will run about $5-$8.

You'd need 6-32 flat head cap screws (FHCS), 1/4" or 5/16" long. You measure the entire length of the screw, with flat heads, to determine the over all length.

A box of 100, 6-32 SS FHCS's is $6

http://www.mscdirect.com/IWCatSectio...87&View.x.y=16

[Load SM5]

Well crap, thanks Russ.