My new toy!

[rkjunior303]

Cryer --

After seeing that thing way-back-when influenced me on how much I really do like the red.. I'm doing a similar setup with the Red ULE, but with a y-grip and a black short CP gas through.... I have a 14'' red to blade fade pipe that should look sweet on it.. The CP rail asa looks sweet too, so i will be grabbing one of those.

[tonybhall]

My 2 cents

Hey Hobbes

Here is my 2 cents....

Play with if a few times before you do anything. If you don't break paint then I would not worry about the level 10. I had a classic that I played with for about 6 months and rarely ever broke paint. But I have had friends that had mags that did chop a lot without the level 10.

I believe several of the suggestions you got in this thread would be a good idea but it really all comes down to what you need and want and what you can afford or are willing to spend.

Getting an x-valve can be a rather expensive upgrade unless you do the go-xvalve trade in. Of course the X-Valve is a great upgrade and one of the best things it allows you to do is get the ULT (Ultralight trigger pull kit). But, with the X-Valve you have to go N2 which can also be expensive.

Hope all this helps. Best of luck with your new/used Mag. I am sure you will love it!

Bryan

[Cryer]

Originally posted by rkjunior303
Cryer --

After seeing that thing way-back-when influenced me on how much I really do like the red.. I'm doing a similar setup with the Red ULE, but with a y-grip and a black short CP gas through.... I have a 14'' red to blade fade pipe that should look sweet on it.. The CP rail asa looks sweet too, so i will be grabbing one of those.

thx.

I wanted to get a pipe, but I didnt play enough to warrant it. It will look real good.

My personal preference is to go with the long CP grip, as I hold the grip closer to the bottom. Longer foregrips give me more leverage when snapshooting.

Also, since your getting a Y-grip and a cp rail, your tank setup will be perfect. I wanted to do this, but again, I couldnt warrant spending the money.

[rkjunior303]

nice.. when i remember my last mag, the foregrip did drop below the frame so maybe I will spring for the longer one.. I just liked how the lines were nice and clean .. It will also be on a RogueRail ratehr than an Omega but they both look bad@ss...

As for the ASA, I was thinking that exact thing. The forward angle of the y-grip gives you just enough of a push forward for me... I have a 45/4500 tank that fits real nice and I may pick up an 88/stubby down the line...

NOW ONLY IF MY TAXES WOULD GET HERE!

[Cryer]

yeah, good luck finding an omega rail anyways

There's kind of a monopoly on them...:/ They arent worth it anymore.

[rkjunior303]

I think Rogues looks just as nice milled out, plus it is a bit longer so you can get that little extra room for the foregrip if needed.

[robdamanii]

Originally posted by Cryer
*pretty pics*

^
Do that

that used to be stock. By the time I finished, I had that mag and all the stock parts put back together and functional.

Here's what order I went in:

Mag
foregrip
intelliframe
level10
omega rail
ULE body & cocker barrel
X-valve (sell the orignial level 10)

Dont get a drop forward. Get a CP rail. Trust me. the way the tank sets back lets you get up on the trigger like no other.

I agree with cryer on this one, his mag was one sexy machine.

[tonybhall]

Hey CYBER

Where can I get some info on Omega rails? Do you have a website for them?

Also, do they have a rail that will work on a RT PRO? Are they lighter than the AGD rail?

BTW, that Red mag you had is the best looking Mag I have ever seen. Didn't you sell that a while back? I know that was painful.

thanks
Bryan

[robdamanii]

I believe I now own cryers Omega Rail.

[Skywalker]

Tunaman has some Omega rails, in black and chrome. You better hurry up and call him if you want one.

[hobbesTZ]

Or you can have your stock rail milled by Logic.

[paint magnet]

I'm with Jayloo on this one... buy paint and have fun. Although I would put a few upgrades on there first:

AGD "bicycle" gasthru foregrip (very comfy, you get a foregrip plus the added benefit of not having to use a 14" hose)

Braided SS gaslines w/ Quick Disconnect fittings

A bottomline setup with an on/off ASA (if you want a drop foward, that's up to you)

11" AGD Crown Point barrel - cheap, accurate, unique, and makes a very distinct sound when fired

[Quickling]

hey cryer, where did you get those grips? They are soooo sexy and I have been looking for them ever since I first saw your setup.

[rkjunior303]

Omega Rails are HARD to come by.. I would suggest RogueFactor's rail -- it is a milled out RTpro Rail to be a ULE, with the wings milled like the omega.. Looks real slick!

[Cryer]

Re: Hey CYBER

Those grips were purchased from Heather Frymark. Basically, they are DYE clear grip panels dyed red.

Originally posted by tonybhall
Where can I get some info on Omega rails? Do you have a website for them?

Also, do they have a rail that will work on a RT PRO? Are they lighter than the AGD rail?

BTW, that Red mag you had is the best looking Mag I have ever seen. Didn't you sell that a while back? I know that was painful.

thanks
Bryan

Omega rails were made by Extreme Rage a few years back, but were sicontinued due to lack of interest. It wasnt until AGD introduced their ULE line of accessories that Mags were looked at in a cosmetic aftermarket. The Omega rails came stock milled out like the AGD ULE rails and would fit any classic68 or minimag. You could use it with an RTPro, but you would have to use a different on/off pin length. The few Omega rails in circulation quickly were bought up by dealers and collectors. If you want one today, some people will charge you outrageous sums of money ($100+), even tho they arent worth that much. They were made in Black Chrome, Grey, Red and Blue, from what I've seen.

And yes... it was very hard to let her go... I still regret it:o