AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
blue valve wouldnt match the blue of my body im afraid of so i wont be getting one of those... however if they made a nickle/shiny in general x-valve id buy that
Check the XPB dealers thread for the answer to the valve
Chord is my favorite. I was close to a Karta emag project but went with Chord again. Also made use of the large cut back on the body front this time. The Chord is cut almost back to the threads, on ULE there is about two inches of tube before the threads. So I had my emag rail notched at an angle up to the body on the front so the profile is similar to the micro/SFL body. Dropped a 10 inch Longbow on it and its very compact and has a nice flow. Using a razor again too.
Comment