autococker question

[fdrsk8boarder]

ok i just got a maxflow for my cocker 2k3 and it only had the low pressure spring in it, anyway it only goes up to like 200 then starts spittin at me like my girlfriend


well my question is can i get it to go any higher without the high springs cause the highest i can get it to go on the crono is about 250-260 anyway thanks for the help

[Ov3rmind]

First off, are you talking about a Max Flow tank or an inline reg?

Have you adjusted the IVG (you should not adjust a Cocker's velocity solely with it's inline reg)?

[fdrsk8boarder]

the max flow itself

yea when i tightend it up it started breakin paint like crazy but i dunno ill get back to ya after i play sunday

[sitting_duck]

don't turn your IVG in more than half way. it sounds like you need to put the high pressure spring in the max-flow.

[hobbesTZ]

You need the HP spring. Simple as that

[fdrsk8boarder]

yea i was thinkin that but i dont have the high spring

can i call smart parts and have them send me one out? it wont take long cause i live in philly

titanium paintball had my barrel here the day after i ordered it

[sitting_duck]

i'm sure they'll send you one. you might have to pay for it but it can't be that much. i've never replaced a pressure spring in an air tank before, but you might want to send it to them to have it done. i could be wrong but when it comes to air systems i'd rather let someone who knows what they're doing mess with it. knowing my luck, it would blow up in my face.

[stondroopy]

I had the same problem you did,changing to a high pressure spring wont fix your problem.i tried the hp spring and it still let air out the burst disc past 240.I forget what exactly the sp techs told me I had to change(this is 8 months ago)but it ended up being almost the same as getting a high pressure unit.

[fdrsk8boarder]

ok i guess its goin to smart parts monday morning

[sneakyhacker420]

get the med. spring - it goes up to around 600psi.