best clamping feedneck

[Methylphenidate]

how long will that be???
from all the feednacks mentioned i like the looks of your feedneck the best but like i said i hate all the sanding

[-=Squid=-]

A lot of people on AO will recommend the rogueneck, for obvious reasons, but I wouldnt. I have had experience with the clamping feeds where you have to manually (with your hands) clamp it... this to me is silly. Unless you do it all goofy, you CANNOT get a strong clamp. CCM > all others, simply because it uses a strap and an allen wrench to clamp it.

[Steelrat]

BP no-rider, lowest neck out there. Not sure how many guns they are made for right now. Generally, I think the allen-type clamping necks, like the CCM, are superior to the twist-clamp ones, like the WGP or Rogue one, though those necks aint that bad.

[-=Squid=-]

Originally posted by Steelrat
BP no-rider, lowest neck out there. Not sure how many guns they are made for right now. Generally, I think the allen-type clamping necks, like the CCM, are superior to the twist-clamp ones, like the WGP or Rogue one, though those necks aint that bad.

I would have recommended the BP, but do they make them threaded for anything but viking/excaliburs?

[RoadDawg]

Originally posted by -=Squid=-
A lot of people on AO will recommend the rogueneck, for obvious reasons, but I wouldnt. I have had experience with the clamping feeds where you have to manually (with your hands) clamp it... this to me is silly. Unless you do it all goofy, you CANNOT get a strong clamp. CCM > all others, simply because it uses a strap and an allen wrench to clamp it.

Have you used a rogueneck? Truthfully you make it sound like it's tough. It isn't. It requires no tools, and get's incredibly tight by hand. IMO it looks nicer then ANY of the clamping necks I've seen on this board. Either way. People recommend the RogueNeck because THEY LIKE IT and use it.

[-=Squid=-]

Yes, ive used an A+ (The same as yours) You CANNOT adjust it with your hopper ON The neck already, and if you are you need to be on the freaking power team. I find being able to fine tune it with an allen wrench much easier than PRE adjusting and cramming it on there.

Oh, and now the feedneck determines whether or not you play aggresive?

[-=Squid=-]

Originally posted by RogueFactor

If you are still confused, PM me your phone number and Id be happy to call you and explain.

Thats a bit creepy...

Im not confused about anything. As far as I know, its just a feedneck with threaded prongs that bend inward and outward, with a cover that twists them forward or back, IE clamping. How could it be different?

[tyrion2323]

Originally posted by RT pRo AuToMaG



I forgot where I was reading it, but someone had a HedLok and he stripped the feedneck or something like that.

Go with a CCM or Roughneck.

I don't understand how the ineptitude of a user equals a bad product... Lots of products get damaged in the hands of people who don't know how to use them.

Hybrid makes wonderful stuff. If you're still skeptical, the RogueNeck is pretty darned nice I hear.

[GA Devil]

I recommend the rouge feedneck or a check it low rise.

[rkjunior303]

I've had good luck with my check-it clamping

[Cryer]

Originally posted by RogueFactor
A neck that fits too tight does not have any *give*. Take a hard dive into a bunker with a *no-give* neck, and your loader can snap off much easier than one with give. Is that an advantage?

With the twister style, it has give. For those who play aggressive, having this *give* is an advantage. You may find it a disadvantage---but for some its not.

To each their own!

Thats why I like the Checkit and CCM style. I adjust the screw down to what I like to give the hopper a little leeway and it stays. I have to be honest, I havent used yours, reson being, I didnt want to sand down the hopper neck... You say you're going to change the, tho?

[GT]

Originally posted by -=Squid=-
Thats a bit creepy...

Why? Did you know that AO has get togthers where we actuallty stop posting for a weekend and actually play? How about getting a room with these same people yet never meeting them until that evening?

There are a number of AO'rs, whom I have never meet in the real world, that are more than welcome to stay at my place. Creepy>? No, its just that AO is alittle different than any of the other crap out there.

jb

[No sKiLLz]

Originally posted by -=Squid=-
Thats a bit creepy...

Why are you so homophobic? He was offering to inform you, not spank you with a Rogue Rail.

[RoadDawg]

Not creepy at all. He has the same thought process as me on this subject. It's just easier to explain it over the phone then the internet. Even better is in person but I doubt he'd fly clear to Ark. to explain how his clamping neck works.

[No sKiLLz]

Originally posted by gtrsi
There are a number of AO'rs, whom I have never meet in the real world, that are more than welcome to stay at my place. Creepy>? No, its just that AO is alittle different than any of the other crap out there.

jb

Hey dude, I just blew up my meth lab. Can I set up in your basement for a while?