Nitro Tank Question - Need your thoughts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rigster_TBB

    #1

    Nitro Tank Question - Need your thoughts

    I have a brand new 68/3000 Fiber Wrapped 3A Tank with the Ace-Flow Regulator. This weekend was the first time it has been gassed up and used. When I removed the tank from my marker I could see what appeared to be a light liquid (I assume some type of oil) had blown out of the tank. I wiped it off and depressed the pin manually, and indeed a light liquid was coming from the tank. My question, has anyone else seen this in their tanks? Is this normal because I haven't noticed this on other HPA tanks I own. If there is no oil used in the regulator during asembly then I maybe need to determine if the paintball store that filled the tank actually had some liquid in their air system and blew it into the tank. Any help would be appreciated.
    Thanks,
    Rigster...
  • robdamanii
    The AO Village Idiot
    • Dec 2003
    • 707

    #2
    Oil+HPA fills is a bad thing, possible fire and all that.

    I'd check to see if other people had the same issue after getting fills at the same shop before anything else. They might have incorrectly oiled something or oiled something they shouldn't have.
    Manager, Ithaca Paintball and Recreation.


    Autorized Smart Parts, WDP, WGP, and AGD dealer.


    If you're looking for markers or gear, drop me a line at [email protected] and I'll do the best I can, or visit us online at www.ithacapaintball.com.

    Comment

    • Rigster_TBB

      #3
      Thanks for the reply. I went ahead and vented the tank completely to hopefully blow most of whatever it was out. It may have been water as opposed to oil. The entire tank and regulator got extremely cold as I vented the air out. The whole thing is just really odd... I should have just left when the kid behind the counter asked if I wanted 4500 psi in a 3000 psi tank. If anyone else has experience or ideas let me know.
      Thanks again,
      Rigster...

      Comment

      • magking
        Its a Hemi
        • Nov 2003
        • 61

        #4
        i had the same problem with my 3a tank i vented it and filled it back up and was fine. havent had another problem with it
        one of these days Your gunna fall in a hole

        Comment

        • RT pRo AuToMaG
          (un)official MatrixDM4Tech
          • Mar 2002
          • 1000

          #5
          Sounds like moisture got in the tank from improper storage/humid storage/dirty fill.
          Red to Black Ironman Intimidator
          Demon UL Matrix Dust Red
          TEAM BACKDRAFT
          Broken Matrix or DM4? Send it to me, I'll fix it, just pay $10 + shipping + parts.

          Comment

          • Rigster_TBB

            #6
            Thanks MagKing. I was hoping somebody had seen this before. I feel a little better...
            Thanks to everyone...
            Rigster...

            Comment

            • trains are bad
              Registered User
              • Oct 2003
              • 1751

              #7
              Might be oil/water mix (oil from the compressor, water from humidity). Not mysterious but still bad. Sounds like thier compressor sucks. I wouldn't get fills there again unless they change thier air drier or fix it somehow.
              TRB's feedback

              Comment

              • Rigster_TBB

                #8
                Indeed.... I will not be visiting that store again. Luckily there is another paintball store about 200 yards up the road. It's odd we have 2 paintball shops within a couple hundred yards of each other and not another one for probably a couple hundred miles in either direction...

                Comment

                Working...