people with x valve

[quazi224]

when u get the x valve do u have to do anything with the level 10 bolt

[lew]

You will have to tune the Level 10 so that it will be able to work properly.

[quazi224]

how do you tune.... do u ahve to put the p[arts in it that come in the little bag

[FreakBaller12]

the level 10 comes installed. You will have to adjust it eventually so it can "break in" so to speak. Go to the tech and read a bit on level 10. Basically if it leaks down the barrel go down a size, if it's bolt stick, go up a size. With some other factors like tuning, chanign spring and shims.

[quazi224]

does this mean u have to go down or up a size all the time or until u find the right 1

[BagelBoy2004]

you just expiriment with the parts until it doesn't leak and is soft enough on paint to your satisfaction.

[RRfireblade]

The L10 comes set up pretty good in most cases.You shouldn't have to mess with it right away.Shoot it a bunch and listen for leaks down the barrel,if/when it starts to leak just go down a carrier size.After that,you may want to experiment w/ the longest spring if you want a really soft setup but that's not absolutely neccesary.

Just enjoy it for a while and learn about it before you start 'tweaking' it.