I got my fireblade trigger today !

[tony3]

Originally posted by Mindflux


Timmies have 90+ dollar triggers.

Are technas really 90+?

EDIT: Technas are 65+5 shipping, what triggers are 90?

[Mole1119]

I got my fireblade installed but one question. Should the magnet be attached to the black nut it seems that i can just push it out with the allen wrench when i am adjusting it.

[CoolHand]

Originally posted by Mole1119
I got my fireblade installed but one question. Should the magnet be attached to the black nut it seems that i can just push it out with the allen wrench when i am adjusting it.

They are just stuck to the adjuster by magnetic force.

You can glue it if you like, but there really isn't any reason to. It can't go anywhere, and the magnet is strong enough that even a good jarr (like dropping it ) won't dislodge it.

I wouldn't worry about it too much.

[Mole1119]

great, thanks

[tony3]

Ryan, the triggers seem very sharp around the sides, why couldn't you round them some more? Or am I just seeing things from the pic.

[tjmpaintball06]

90 dollars... thats why im never going to buy a timmy.

[tony3]

If someone can find a 90 dollar trigger for timmys, I will bow down at your feet.

[tmnothing]

I got mine and installed it yesterday. Wow this design is amazing! I'm still working out some problems I had with the HES magnet but I'm able to get such a smooth, crisp, and short trigger pull that I couldnt get with the LT-3 blade trigger or even the stock trigger. Once I get the HES magnet working properly (loctite is working as I type) that trigger will be unbelievable. Great job guys!

-AK

[CoolHand]

Originally posted by tony3
Ryan, the triggers seem very sharp around the sides, why couldn't you round them some more? Or am I just seeing things from the pic.

You're just seeing things.

They're not sharp, but they come very close to having a point at the very bottom.

Later

[Vendetta]

I'll have to get some locktight tonight. I also had a problem with the trigger rod. I had to back it up so it would work in E mode. I haven't been able to get it to work in both E and M mode.

[whopper72]

pin

i just odered one and i was wondering how it compares to the stock, lt-3, and the tl63 triggers. I have all three just want to know what this one is like............


I find the easiest way to get the pin out is using a drill press and a block of wood. first remove body drop and grips. Cut a notch in the wood so selector switch doesn't have to be removed. Put a bit in the drill press. Un plug drill press DON"T TURN it on. do it in reverse to get i back in. thats how i do it

[bambam]

Sold Out??

Hi all,
I tried to order mine to day but was very disappointed...
NO MORE AVAILABLE!!

Does anyone know any updates as to when they'll be more??

By the way, very KEWL trigger!!!

Thanks.

[Bulldog]

I've got one if you're interested. Shoot me a pm.

[RRfireblade]

Logicpaintball(who does the milling) is on a work based rotation.That is,he takes each project in order and rotates them as the are completed.

My rotation just went by.

Fireblades should come up again in a few weeks,There still seems to be a good amount of interest and as people get to use them,I think there will be more.Perhaps enough preorders for batch #2 would get Ryan to mill another run sooner but that is entirely up to him.He does after all have a business to run,and my triggers are likely not enough to do it alone.

Thanks,
Jay.

[purplemag]

WARNING, WARNING, WARNING!!!

When you go to put on the new trigger and punch out the trigger rod thing. Make sure to do it on a somewhat soft surface!!! I didn't and my selector switch broke in two. Luckfully it was in E-mode at the time and that is what I am stuck with until I get a new switch from AGD.

But the trigger seems to work very very well. Haven't had a chance to fire with air, but it seems smooth.

Also, I was walking it and all of sudden it started taking off on me, yup going full auto. I was like, sweet this thing makes me walk like 25 bps. But then I looked at the red blinking light...LO BATT! But it was a cool feeling!