The life of my mag..

[Digits]

Well it's been a long hard journy.. A ways back I got a mag.. I liked me mag.. But I liked electro more.. So in between the stages of this mag I had an e-cocker, a bko, and well I still kept the mag threw all of the hard times..

Now here is the life story of my mag..


Ch.1

It all started on a lonely afternoon when I was browsing a f/s forum.. I seen a mag forsale asked for pic's and well.. Long story short I ended up buying it.. This mag was ugly, wood grips, single trigger triggerframe, no lvl 10, nothing.. By no means a dream mag.. Here she was..

[Digits]

Ch.2

I needed a way to spice up my newly founded mag.. So I decided I should order a lvl10 and a chrome intelliframe from Tunaman.. Which is what I ended up doing.. This changed the mag completly... Just the switching of the triggerframe made the mag go from but ugly.. To somewhat stunning.. She was now all chrom'd out and several times I would polish her up to just show her off.. It was at about the end of the intelliframe faze that I wanted something new, something faster.. The intellframe was just not fast enough for me.. So I began trying to sell my mag. Here she was:

[Digits]

Ch.3

After trying long and hard to sell my mag so that I could buy some type of electro I became somewhat depressed.. No one wanted to buy my nice mag so I though I should part it out.. I ended up selling the intellframe for almost what I pad new, and my mag was back to the ugly stages..

Soon after this incident though I mad posts around forums, and to my surprise Smoke from the xtreme pball place (do anno's on the forums) pm'd me saying he was selling an e-bladed cocker.. The price he offered it to me was very apealing to me at the time, and although it was a stock bodied cocker, it had all oracle parts, which was really nice. But I did not have the money to pay for it.. So after long long deep thinking for a couple of weeks I decided that I would go in debt a little and buy the cocker.. All of this was happening during my buy for less sell for more face in which I bought a BKO and sold it for $100's more, which helped paying off the debt alot becuase Even though I only made $100 I still sold it for around $350..

So I got the cocker, and it performed flawlessly.. It was spectacular.. I finally had an electro, now I could shoot some ropes.. Meanwhile I bought a halo during this face.. Because well quite frankly.. A revy doesn't cut it for an ebladed cocker.. To my dismay though.. The cocker bounced.. And it was rather bad bounce.. I could almost get it to go full auto from kick alone when I had the trigger the way I liked it.. So I lengthened up the trigger and all that but still there was always bounce.. So, even though the cocker worked great for me, I decided to move on.. I sold the cocker a couple months after I got it for about 50-100 less then I bought it.. Which didn't faze me to much because with the bko earnings and this it kind of started to even out the playing ground..

cocker:

[Digits]

Ch.4

So here I am $875's in my hand.. And I needed to buy something.. I think at this time I had acquired a hyperframe.. This happened either before the e-bladed cocker, or after.. I can't really remember.. I know I got it before I sold the cocker though.. So here I had a hyperframed mag with a stock valve, a lvl 10 that had it's share of problems (I didn't have a carrier that would work, I think I had two of the same or something).. But yes.. I had the hyperframe.. And the rail which I had at the time was an aftermarked one.. Which caused nothing but problems for the hyperframe..

So I went on a journy.. Thinking about guns I should get.. So finally I cracked.. I wanted an x-valve and a ule body.. But I wasn't willing to buy them seperate so by now the RT-Custom had been released.. I really didn't want to buy it from AGD though.. Because well I don't like buying direct from companies.. Especially ones in the states.. It gets complicated and I would rather deal with a person directly.. So I seen fragtech (sp?) selling them for cheaper.. So long story short I ended up getting one of him with a ULT, x-valve, and a ULE body.. And here she is today:

Note: Recently I stickered the forgrip massivly, sanded down my halo, and threw some stickers on the barrel.. Now, I THINK, it looks a bit better because that forgrip really made it ugly.. With stickers it's not as bad.. I also got a new 68/45 hyperflow tank to replace the fat one :P..





Upgrades to come will include a logic milled rail.. A HAIR trigger.. Or a custom one.. Havn't decided yet..

Thanks to jayloo for the picture hosting

BTW: Sorry for the really crappy quality of some of the pictures.. The last few I took in my brothers room and it's to dark for the camera to get anything somewhat good.

[SuiciDal Sn Y p ER]

MORE PIX MORE PIX!!

your mag kinda looks purplish blueish in that pic

[WARPED1]

Why on earth would you get a hAir trigger mod for a Hyperframe!

[Spartan X]

Well if he gets a hair then he will have to get rid of the hyperframe.

[-=Squid=-]

Originally posted by WARPED1
Why on earth would you get a hAir trigger mod for a Hyperframe!

He also had an I frame.

[Digits]

Because hyperframes arn't ideal.. There tempermental and if you mess with them at all they tend to break down, usually all you have to do is mess with the settings and/or move the sear around to fix it.. But it still gets annoying...

And I will get more pics as the sega continues.. I guess I could get some with all the cool stickers.. I just need to find the camera first.. Stay tuned :P

Edit: More pictures added in ch.4