My 03 SHOCKER and Qloader!!!

[Cryer]

Originally posted by OysterBoy
Hey to make it a little more tight, why not turn the qloader around and push it all the way in, up to the battery pack.

[BODY][ ]:BARREL:
[BTRY][QL]
[BTRY][QL]
[BTRY][QL]
______[QL]

I hope that made sense. Basically, turn the Qloaders 'Head' Around 360*.


Nice gun lol

I was about to suggest this...

Turn the q around, so the hose comes out the back and to the left. It will be much cleaner that way...


One thing I've considered, is getting a highrise mag body, and mounting the Q to that, laying parallel to the body.

[trains are bad]

Qloaders suck.

I have one.

They simply do not hold enough, and you cannot carry enough.

Only consider one if it will honestly fit your style. Almost pump-style.

[FutureMagOwner]

well i do that because:

1. i can

2. i already have the proper length and stack and stuff for that and im lazy

3. i dont have it directly on the battery and 360'ed so i can grip the battery like i prefer to and so i can remove it to charge it.

owned! just kidding :)

[RRfireblade]

Originally posted by FutureMagOwner


owned! just kidding :)

Alright wiseguy,
How 'bout at least one pic that shows your whole gun AND the whole qloader in at least ONE shot?

BOOYAH SHIZOWNED!!!!!

[FutureMagOwner]

lol i had some like that but the picture was like 2 times the size i guess ill reload one of them then

[Lohman446]

My q-laoder lasted me about six aggravating hours... then it went into a box in my closet... two days later, warp feed from AGD and HALO backman TSA....

[Chronobreak]

ironic that he claims to have done the oppostie with his halo and warp...:/

[JT2002]

Originally posted by Lohman446
My q-laoder lasted me about six aggravating hours... then it went into a box in my closet... two days later, warp feed from AGD and HALO backman TSA....

what problems did you have? i actually found a great very fast way to load a q loader if you have the right tools (ask and you shall receive )

[FutureMagOwner]

hehe well ive sent my halo in how many times now and its come back BROKEN how many? (ill give you a hint it starts with thr and ends with ee ) its all fixed except it came back the last time with a broken battery pack thing... 3 bucks to replace but i dont really feel like paying it after sending it back so many times (they can replace the shells that didnt need to be replaced for free but didnt change the battery pack...)

anyway i dont mind its almost there however its use is dwindling to me since my egg is working well enough on my gz and my warp wont work on it without an intellifeed (not enough vibration lol)


o well q loader doesnt have fancy pants electronics which means i dont have to buy batteries or have to worry about them dying ALL THE TIME!!!

[Lohman446]

My q-loader and I did not have technical problems that were entirely its fault... I will admit that my not liking it has to do with it outsmarting me. And outlasting my short patience. So I play speedball cause after like ten minutes in the woods I get bored and start walking towards the heavy brush my opponents will be in... its me

But, specifically - I could never get the right number of prewinds... I think that was the problem, not that I didnt try a bunch. They would not feed on the field, tehn I wuold pull the hose (which maybe I had pinched, I dont think so but maybe) and it would shoot out 100 rounds onto teh ground instantly. It was breaking balls going into teh chamber (to many prewinds) and then I would load a pod and that one wouldnt work, so I would load another... and another... it got annoying.

Loadign it was a pain - my richoet on a bracket and then the spinny thing (good technical name). Well I had to wiggle the richochet from time to time to get it to work, and the silo just sucked

All in all, a little more time invested, a little more patience I could have been happy with it, I think.. but I got aggravated and well.. I play paintball to relax.

[FutureMagOwner]

you took apart the pods didnt you.... you need to make sure the spring is properly aligned along with plenty of full rotations not clicks mines uber reliable now before i was smacking it and stuff to get it to start loading and it was because the spring wasnt alligned

[JT2002]

honestly, i did just about 10 full turns for prewinds give or take, i wasnt realyl specific. another thing i found was that sometimes the core spindles were out of line a place, so u have to pull it out and turn it 90* to line up teh highest part of the core with teh opening inthe loader. ripps on my timmy like crazy, but lack of compact setups are turning me away from it

[Lohman446]

Originally posted by FutureMagOwner
you took apart the pods didnt you.... you need to make sure the spring is properly aligned along with plenty of full rotations not clicks mines uber reliable now before i was smacking it and stuff to get it to start loading and it was because the spring wasnt alligned

You might be right... someday I might have to try it again... or not. You have to understand, I started with six pods... it ended wtih five after a particularly annoying failure.

[FutureMagOwner]

i know what you mean lol just check out the manual if you still have the rest of them and it will show you what i mean about the spring alignment i was doing everything right except that and was having the problems you described

[yeahthatsme]

is that the new dynasty 03? my friend got one, he said it was freaking awesome. i love that q-loader too, i heard it feeds super fast. did you get that WAS mod in your shocker? i heard it makes you cheat better.