Regs?

[LeatherPants]

I remember TK telling Flyboi to run higher pressure if he wanted a better ROF on his X mag. Same with the E Mag with lvlX. In inline will just drop your pressure. I think Flyboi is running somewhere close to 1000psi input.

If this isn't going on a Mag I would recommend

Sidwinder
CP

[punkncat]

ANS Gen 3 reg.
Super nice for HPA.Very consistant , easy to adjust and rebuild.

[-=Squid=-]

To much stuff on a sidewinder? Have you ever even seen one? There is one adjustment screw on the bottom, like any other inline reg.

Go for the sidewinder... very good regs.

[soccer4minimags]

Originally posted by FallNAngel


\
I highly doubt a new product is cheaper than the original (the stabilizer). The original (IIRC) didn't require an LP spring and the fatty is not 0-900, they're 0-450.

\

Yes it is, why don't you take a look. Male vertical stab is $100 with no gauge. The new fatty is less at $89 and the guage is included.

Nobody said the fatty was 0-900, that was referring to the original. And yes you can run it anywhere in that range but for best LP results you need to purchase a $30 kit that converts it's max out put to 225psi.

Either way the fatty is a better buy than the regular unless you need that really high output. :

Edit, these are PPS prices by the way since I don't know of any retailers besides them that sell the fatty.

[Enemy]

um for a mag i would definetly avoid using more than the tanks input reg mags are high pressure when it comes to input but the pressure gets regulated down bye the vavle to around 650psi so yeah. if its not for any mag then take these guys advice cuz i dont use regs.