What's in your tool box?

[rkjunior303]

Just gearing up for the spring/summer and getting my stuff together. What do you guys keep in your tool box in addition to the essential stuff like screws, o-rings, lube, loctite, teflon tape, etc.?

[FreakBaller12]

2 sets of 8 allen wrenches, teflon tape, extra macro, gun oil, level 10 crap, a leatherman, wrenches, screwdrivers, extra screws, an extra drop,some o-rings
That's about it i guess.

[Havoc_online]

Never enough. Depends how prepared you want to be, and how much your willing to spend. Dont buy cheap tools, get quality stuff.

[tony3]

A lighter for heating up loctite, and for heating up shrink wrap incase of wires breaking. I also carry enough parts to rebuild an entire revvy. I also have random spare parts like a mag bolt, mag reg piston, tippmann sear, cocker sear, cocker trigger plate, impy hammer, just random parts I have picked up along the way.

[Fatjon]

Well about 2 months ago i built a killer tackle box. It was nice until the lazy teammates got ahold of it. they just never put anything back. It had like 4 sets of allens. Wrenches, picks, angel tool kit, teflon, macro, macro fittings, orings, rebuilt kit for about every gun on the team, detents, feedneck. But now it is pretty slim picking to find an allen wrench lol.

[FallNAngel]

Good lord... definately more than I need. Better to have it and not need it than need it and not have it.

Cocker Rat2 valve
Assorted cocker springs (mainly hammer/sear)
a few tank o-rings
dental pick
2 pair vise grips
1 rubber padded c clamp
1 cyber tool
1 screwdriver set (replaceable heads)
teflon tape
blue locktite
a strap wrench
caliper
Palmer Stabilizer
Revvy Eye / Lid
Large tube of White Lithium grease
Tippman Drop
cocker jam nut
assorted screws & set screws
3 sets of allen wrenches (1 metric)
2 small sets of pliers (1 needle nose)
1 large pair of autoadjusting pliers
1 AKA Stabilizer
1 ST Bomb stem and o-rings
1 KAPP Rhino LPR (missing nipple)
1 cocker->cocker thread converter
1 Angel toolkit
Macroline
various air fittings
KAPP Stubby bar for a DZ
Angel trigger

Of course if you want to add in my spares I also have an Evo2 and a pair of JT Flex's (but those aren't in my toolbox...)

...could've swore there was more... I might be missing some...

[RoboBeaver]

gun oil, scissors, extra asa, extra screws, o-rings, nubbins, some old parts, a gerber multitool, allen wrench set, loctite, electrical tape, teflon tape, acouple batteries, and its not complete, i had to dismantle it abit and never got it back together

[CaliMagFan]

something for the kiddies

hey there---
i've found after years of playing the people that are the most in need of help are the new kids that are out there for their first or second time with a brand new spyder or something..

i'm constantly seeing a bunch of kids "ditching" a buddy at the field for a few games cause his marker is busted and none of them know how to fix it. they kind of just let him fend for himself, and i, or someone like me helps him out.... i used to shoot spyders, whom among us didnt?... so i still have lots of those old parts and rebuild kits, so i keep them with me, so the guy i am helping out doesnt have to go drop 8 bucks at the proshop for the WAY overpriced cup-seal or bolt o-ring etc....

of course thats on top of all my mag gear, i usually have about 1.5 mags worth of parts at all times on me...teflon, lube, wrenches, screwdrivers... maybe a little rubbing alcohol for cleaning those revy eyes??? thats an easily missed one..spare hopper elbow if you need one...


good luck in the comming season of play.
-kyro

[UltimatePaintballer]

PICTURES!!!!!!! hey see anything you want just pm me!

gotta find a place in there for these! 14 of them


bottom shelf
:

top shelf

[rkjunior303]

yeah, i just made myslef a nice list of stuff 'to get'.. fortunately (or unfortuantely) i'm not shooting a mag right now so I don't need alot of that stuff.. With the omen, it's pretty straight forward. i need to get new vice grips and a new ratched screw driver.. i have an entire 2nd set of internals.. o-rings.. loctite 545. i need to get some thread lock to go along with it.. im out of teflon tape etc. its been 2 years since ive been serious about it so i have some catching up to do!

[Statik7]

Box 1 - Spare misc parts (orings, air fittings, teflon tape.)
Box 2 - misc hardware (nuts and bolts, 2 mini adj wrenches, gorilla proof metric, torx and inch allen keys )
Box 3 - Spare gun specific parts (valve o rings, bolts, parts kits, etc)

inside tray - socket set, screw drivers, barrels
bottom bucket - my gear (hoppers, tanks, backup gun, main gun.

As you can tell, i like to stay organized

[FallNAngel]

Re: something for the kiddies

Originally posted by CaliMagFan
i used to shoot spyders, whom among us didnt?

::raises hand:: I started with a cocker

That's the other stuff you guys reminded me..

A Shocktech ASA, Electrical Tape, some Shocktech oil (probably goldcup), and probably 12 small car ignition wrenches (they fit damn near everything).

[Methylphenidate]

well just about every thing i have has already been mentioned so ill just list a couple of important paoints people over look
- when you buy allen wrenches get both metric and standard and get the good ones with the ball ends
- a set of dental picks
- a wire brush the small kind like you get in real gun cleaning kis
- a small set of files
- loctite
- lighter
- strap wrench
EXTRA PARTS FOR YOUR MARKER or atleast a repair kit

[tonybhall]

????

what's not in my tool box would be an easier question to answer. B-)

[Big_Chops]

snap ring pliers, angel tool kit, may oring and rebuild kits for my angel. parts to rebuild a detent, macro fittings, macro lines, adjustable pliers, screw drivers, razor blade, super glue, lighter, electrical tape, 3 set of allen wrenches, 2 bottles of lube, teflon tape, extra screws, batteries and the ktichen sink and bathtub. heck didn;t even look what else is in there and i am not done adding.