where is a good place to get just the orings? i have gone through several in the past couple months and have just been through misc orings i have foudn in my tool box on the. only problem is they arent a perfect fit and i know they leak real slow. so slow you can't hear it, but if you put your finger over the hole for a little bit, then pull back you can here a hiss.
-
-
AGD has a oring that fits. I forget which one. Tear into your valve till you find it.
-
thats probably the oring i used...but not sure....anyone know which oring it is from the parts kit that works?Comment
-
I believe it's the Reg. piston O-ring from a classic valve. I'm not sure if it's the same on the RT/Xvalve.Originally posted by thecavemankevin
thats probably the oring i used...but not sure....anyone know which oring it is from the parts kit that works?Forest Gump of paintballComment
-
Na the reg piston o-ring is way too big...
Its the Powertube O-ring... The thing is great it never leaks...Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
-
are you sure bunny?
you mean the oring that goes around the pt tip
that seems to large...althoug it has been quite a long time since i have looked at a pt tip bacause of LX...but just from memory it seems a bit large.
guess i will try that when i get homeComment
-
If your fill nipple has the cyl. shaped pin then it should take the reg. valve pin oring #000779. I switched my fill nipples to AGD Flatline ones. Way better design.Comment
-
The AGD Flatline fill nipple o-ring is the RT Valve on/off center o-ring. The o-ring between the two halves.Comment
-
ohhh haha fill nipple o-rings i get it...
I thought you meant the Quick disconnect o-ring...Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flagsComment
Comment