what is bad about running the retro valve on co2? i'm not going to try it but i was just wondering whats wrong with it
-
it will mess it up-Minimag Body HR
-Retro Valve
-Z grip with extender
-12V X-Boarded Revvy
-6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
-68/3000 Flatline -
the valve recharges way too fast for CO2 to change from a liquid to a gas, resulting in freezing the valveComment
-
Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
-
If the co2 does get into the valve the retro will freeze over, blow off, and drop off... Even with those countermeasures the retro will screw up and drop off...Originally posted by magic55
but doesn't that happen in the regular valves to ( freezing the valve)? what if you had a real good reg or expansion chamber and a remote to give the liquid more time to expand.
.
Good Traders:
Tunaman, K-villeplayer, Magman007, Mastersconi, Jon/xpm, Kenndogg
My feedback if you've dealt with me, leave some...
Fruitcat: it's what AO doesn't like.
Comment
-
The ReTro valve/RT valve cycles so fast that it actually heats up the gas. If you use CO2 it will heat it up and turn it into liquid, then it will freeze over, then orings break, then you just messed up your gun because it automatically turns liquid inside the valve. You can't use an expamsion chamber because if you heat up CO2 it turns into liquid, therefore no matter how good an antisiphon tank/expansion chamber you have, CO2 still turns to liquid when it heats up.
ENDO!OldskoolComment
-
Yes it does
ENDO!OldskoolComment
-
Doesn't heat make things more gassy? That's how it goes in my physics book...
.
Good Traders:
Tunaman, K-villeplayer, Magman007, Mastersconi, Jon/xpm, Kenndogg
My feedback if you've dealt with me, leave some...
Fruitcat: it's what AO doesn't like.
Comment
-
I'm just repeating what Mr.Tom told me.
ENDO!OldskoolComment
Comment