Warp + y-grip

[rkjunior303]

Anyone willing to show me a pic with a Mag w/ a y-grip and a warp? How far forward does the warp end up in relation to the tank, etc.. I'm more worried about getting around it to the foregrip -- does it make it a little too tight or will the foregrip pushed out to the farthest point be ok?

Thanks!

[Fade]

Putting a warp on a "y" frame shouldn't be a problem at all. The Warp comes with a Plate that can be flipped one way or the other on your frame. Look at these pix.


In the 1st pic, the second piece on the left hand side in the pic is the plate I'm talking about. In the 2 other pix its on the right hand side.

Since most frames are angled towards yourself, you would have the plate's angle away from yourself. The "y" frame works opposite, it angles away from yourself, so you flip the plate that the warp hooks up to the frame, and have it angled towards you. That should make a good tight fitting and keep the marker looking very clean.

[rkjunior303]

pic didn't load but I understand what you mean

[DementedChild]

the warp bracket fits nicely to almost any gun (except the spyder offest) i mean i have it warpped to my cocker, now only if wgp made a y grip for that gun. but i take it agd has the patent on it so it will have to go on my mag instead

[Fade]

Check my original post again, I added 2 other Warp pix.

All 3 pix have the Warp in a disassembled fashion, and all show the plate I'm talking about.

But you got it!

Also, I found a pic of a "z" frame with a warp on it. Its not mine, but who ever it is should take credit for this awesome looking Mag!



One last thing, I highly suggest an Egg2 on a warp, the Egg's feed neck is at the front of the hopper and allows the feed tube on the warp to fit better. In-turn this makes your marker's setup VERY tight.

[SlartyBartFast]

That pic is a "Z" grip.

[dansim]

did you not happen to see the 6 different ones(about) at aone?

[rkjunior303]

did you not happen to see the 6 different ones(about) at aone?

shoooooooooooooooooooooosh!

[dansim]

Also, I found a pic of a "z" frame with a warp on it. Its not mine, but who ever it is should take credit for this awesome looking Mag!

That pic is a "Z" grip.

hmmm captain obvious was a wee bit slow

[penguinpunk555]

[Gunga]

Here's a couple pics of my Y-Gripped gun...






The way the standard warp bracket is machined put the warp/hopper too far forward or too far rearward for my liking. To fix that, I drilled a couple holes so the bracket would attach perpendicular to the centerline of the gun.




With both screws tightened down...