Evil omen question

[Chowee21]

i am playin with my friends evil omen becuz i sent my mag in for some work, so does any one know what input pressure i should use and where the velocity reg is

[rkjunior303]

You should use a HP tank on the gun or else you risk starving the gun, even though it only runs on like 250-300psi... The Detonator reg should be in front of the trigger frame, very similar to a gas-thru...

First thing you want to do is turn your recock screw all the way to the right (in).. Then adjust your velocity using the Detonator until you hit about 310... Then adjust your recock appropriately.. With a properly set recock, the velocity should drop to normal. There is a set screw on the Reg itself.. Loosen that and the ring on the reg should spin -- the higher it goes, the lower the velocity.

Hope that helps!

If you need any more info, I'd check out the 'Evil' Forum on PBN - there are alot of good tips/people over there. www.pbnation.com

[mobius]

Jebus, that complex. I am now reminded why I love my 'Mag so much...

[spacemonkey]

...

its not that hard
i had an Evil Omen... but some1 stole it... thats why i went to the goodside and got a MAG
but the things is though all it is is a twist and an allen wrench
well a mag is more easier
but it beats cockers's timing crap...

[tyrion2323]

The Omen is super easy to tech. Like I tell everyone, it operates like a closed-bolt Spyder. It's reliable and super-simple.

In terms of operating pressure, it operates at around 250-300 psi last I heard. I'm replacing my regulator, so I'll let you know what it operates at with a Hybrid RDrive.

Not that you really need LP...

[sitting_duck]

its not that hard
i had an Evil Omen... but some1 stole it... thats why i went to the goodside and got a MAG
but the things is though all it is is a twist and an allen wrench
well a mag is more easier
but it beats cockers's timing crap...

it's not that hard to time a cocker.