After 12 years.....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RobAGD
    Cantankerous Administrator

    • Oct 2000
    • 2030
    #1

    After 12 years.....

    I finally had a gun failure that caused me to not to be able to shoot my Emag at teh end of a game. I have been using AGD guns since 92 and this is the first time EVER that I could not at least shoot my gun at the end of a game.

    I have broken off grip frames, bent rails into banana shapes and many other kinds of breakage but I was ALWAY able to at lest fire my gun.

    Well at the Orlando Cup in a game VS Havoc the gun didnt just break it broke real good right after the start of the game. Gun Chronoed fine and fired about 10 shots at the start and died.

    Fiddled with the M / E mode and thought maybe it was boly stick or broken main spring.

    After the game, I get the valve out and I see the on off pin and sheared off and that the Clevis on the solenoid plunger was broken.



    and



    Now as near as I can tell, the broken chunk of pin locked up my trigger from working in manual mode and the broken clevis. I have no idea how that happened, never have seen a failure like that but the on/off pin thing I have seen before. But it was all good in about 5 minutes with a few new parts.

    Kind of a bummer to be honest

    Oh well Crap happens then you step in it

    -Robert
    Serving AGD customers since 93, wishing I could beat some common since into some of them about 5 hrs later.

    Tags: None
    • cphilip
      Former Moderator

      • Jun 2026
      • 16216
      #2
      Amazing.... Darn hard to tell what happened there isn't it. But I suspect you just flat out wore the darn thing out Rob! I mean it took some steady use to finaly snap a main part like that.

      I had one snap a On/OFF pin from my own stupidity and the little piece lodged like that and the thing would not fire. No way no how. Had to drive the valve out with a wooden dowl and a hammer and the little piece finaly let go. No other damage though. SS body thank goodness at the time. But it didn't mess any other thing up. Perhaps because it locked up without firing again. In your case it looks like it snapped and fired once or twice before it lodged and levered up the sear. Probably a good thing the circlip gave way.


      AGD, where we are so good we can do it with only ONE tube!

      cphilip.com

        Comment

        • hitech
          Not a shedder of vortices
          • Nov 2001
          • 4775
          #3
          A friend of mine seared off the bottom of a MINIMAG on/off pin. You should have seen Tom's face when I showed it to him.


          Hey Hitech your starting to sound like me! - AGD
          Hitech is the man.... :eek: - Blennidae
          The only Hitech Lubricant

            Comment

            • Halliday
              Level 10
              • Oct 2000
              • 1655
              #4
              I've sheared off the on/off pin in my E-mag. In my 3 years using Mags it was the only time I had a major malfuntion that

              1) I could not fix on the spot (no spare)
              2) was not my own stupidity.

              I have to agree with cphillip, I think you just wore the part out


              Super Moderator at Pbreview.com

                Comment

                Previous template Next
                Working...