dye stainless barrel for automag

[Orion33]

would an 8.5/10 inch (cant remember) dya stainless barrel be very accurate..compared to say a 12" jj ceramic or 12" lapco bigshot


i kno its sorta short..but i also hear paintballs are stabilized at around 8 inches


if i bought a gun with that barrel would a new barrel be an immediat upgrade..or is it an ok barrel?

[Dayspring]

That all depends on the kind of paint you shoot.

Paint comes in different sizes, as do barrels.

If the Dye fits the paint you use more often, then go for it. If it doesn't, then other barrels will be more accurate.

[Orion33]

well compare it to paint to bore match...the dye w/ perfect paint vs a lapco bigshot 12" with perfect paint...will they be similar?

[Orion33]

would people recomend getting a new barrel..or is it good enough

[Orion33]

plz...does anyone know..cause im about to buy an electronic hopper..and im wondering if the moeny would be better spent on a new barrel

[Dayspring]

It's a polished hollow tube shooting the absolute WORST projectile known to man... Don't put so much thought into it.

[USAF-Flyboy with a Mag]

I had really good results using a 14" dye ss with pmi prem and evil paint.

[rx2]

I actually have a stainless DYE around that length, which I purchased sometime around 95, and it works just the same as any other barrel I have ever put on the end of my Mag. I think that the only real difference is in the noise profile, which isn't that big of a deal in most cases.

[trains are bad]

It's a polished hollow tube shooting the absolute WORST projectile known to man... Don't put so much thought into it

Word. One of the most accurate barrels I have is a 7.5 in Bigshot.