spyder foregrip

[dragun_30]

ok, what is a good gas thru foregrip i could put on a spyder aggressor?

[t33kyboy]

a good looking one. all the gas thry foregrips work the same, one wont be better then the other.

[dragun_30]

of course a good lookin one, but is there a certain kind that is easier to install?

[TheTramp]

They are all basicly exactly the same to instal.

Any gas-through will thread into your Spyder's vert. adaptor and then its just a matter of running a line from the grip to your ASA.

I will say however that if you use pretty much any gas-through (or reg. for that matter) it will have American threads so you will either need to get an adaptor to let the air line attach to your Spyder ASA which had metric threads or get a new ASA.

Of course, if you are using macro line then this isn't a problem because while the macro line fitting have different threads the macro line the fitting take are the same. IE: you can have a metric macro line fitting on one end and a "standard" fitting on the other.

[sharpshooter1286]

If you have an agressor, your going to need to get a vertical adapter to. they are easy to find, and usually not that expensive. as for installation, all you will basically need to do is remove the gas line, put in the vert. adaptor, then screw in your gas-thru. there will be plenty of extra hose, so you don't need to worry about getting a different gas line. Just make sure all connections are sealed properly. Installation will be exactly the same for all of them, no difference. if I were you I would get a Dye Gas-thru, they are nice and comfortable, and its Dye.

[ZapTheMad]

The first thing you need with an Agressor is a Vertical Adapter. The Aggresor is a full bodied Spyder and you need an older style adapter to make it work. Here are a couple links to the type of part you need.

http://cgi.ebay.com/ws/eBayISAPI.dll...681511777&rd=1

http://cgi.ebay.com/ws/eBayISAPI.dll...682043037&rd=1

After that, you might consider an inline regulator instead of a foregrip. Though not really needed, it will help your shot to shot consistency a great deal. Instead of going to the chrono shooting from 260-290, you will see from 270-280. This will really help you shoot your gun more acurately because the ball trajectory is more consistent.

Some good regs are:

Palmers Stabilizer
MAC DEV Gladiator
Air America Vigilante or Messiah
Bob Long Torpedo

One last thing you will need is a metric thread adapter. This piece fits in your current bottomline and allows you to use standard hoses and fittings on your Kingman metric threads. All aftermarket non Kingman parts use standard threads.