Blade trigger on classic mag?

[Stealthgerbil]

Can I put a blade trigger on a classic automag 68 with the stock gripframe if I cut off the finger guard?

[space_weazel_45]

you can do anything you want depending on how much modification you want to do, if you are asking if you can put just the trigger from an itelli on yes it should work but runs a good risk of messing up the trigger works[not permanently just that the gun may not fire with it on]

but try it! an opportunity not taken is wasted. and i love moding guns.

[Stealthgerbil]

Yea, I figure its only $20 and I have plenty of time on my hands, so I might give it a try. Its a lot cheaper then buying an intelliframe, and I could probably make my own trigger guard. Can you melt carbon fiber?

[The Action Figure]

im sellin an intelliframe trigger only for 17 shipped

[space_weazel_45]

can you melt it yes would i do that to form a trigger guard no, i would get some alum. or steel flat and cut, bend, shape it in to a trigger guard paint it ans screw it to the palces you cut the original off. make sense?

[TraXeR]

Yes, but the trigger 'nub' that you put the trigger pin through is too thick, you have to sand down the inside of the grip. I did it a while ago, just takes sanding and it works perfect.

[ojhspyro89]

Gideon, is that just the trigger or the whole frame?