Yep, valve tools are about 12. As for the lpr knob, dont loctite it on. If you get a rock, dont get a knob for it. The knob just saves you 3 seconds and can create unwanted pressures. Also, you may want to stay away from mini lpr's. Mini's tend to have a fewer amount of turns to go from 0-75 psi. So, it will be harder to set at the wanted pressures. I believe the FGP by Shocktech has a pretty stable knob. One lpr out there, and Im pretty sure its the FGP, has a knob which will not turn from vibration. But dont buy an LPR over " The vibration causes it to back out" If it does, simply adjust it after you get off the field. But like I said before, one where an allen key is needed to adjust, is just as good and easy to adjust, but you dont have to waorry about it backing in or out. Hope this helps.
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment