Devil Mags

[FallNAngel]

I didn't mean to compare the two, I know the lvl 10 works great. Just with the lvl 7, you can use your tank untill around 450psi. The lvl 10 is like 950psi. Who cares, lets keep it on the topic.

minimag03

No trying to start an arguement, but the LX can work down to 450 IIRC as well... it's just that the higher pressure, the more reactivity you can get from the valve.

[minimag03]

When I used my, I couldn't get it to work below that because the long spring required so much pressure to push up. I could with the stock spring. But as I said before lets stay onn topic.

minimag03

[GA Devil]

the reason for the kick if you notice im not holding the gun very tight cause I was trying to let you see as much as possible same reason i stopped and did a few pulls single so you could see it was legit and not bounce. I personally run a lvl 7 cause it will cycle faster and i havent chopped with my foamie bolt yet, being thats what the eyes do..prevent the bolt from coming forward unless the beam is broken.

[rx2]

I notice that you mention that the setup includes the ULT. When it first came out, there was speculation that it could be used to decrease the size of the E-Mag solenoig and batter. From what I remember, however, Tom stated that the ULT would not be a good idea to use with an E-Mag, as it would lower the maximum rate of fire due to lower return pressure, which meant a longer lapse of time needed to reset the sear when coupled to the solenoid (also mirroring to a small extent what Deadlywind stated when asked if the ULT would be wise to use with the tentatively named hAir trigger). It appears though that with the Devil Mag solenoid and electronics confirguration, there is no problem at all hitting whatever rate of fire you can physically pull off. I realize that the point is perhaps no longer relavent with the discontinuation of the E and X mags, however, I still find it interesting. Are you guys doing something differently than AGD in order to maintain a high cycling rate with the ULT and an electronic frame?

[ProX9]

i think the excess kick was due to the fact he was using a remote, if you look under his arm it looks like a remote hook up to me on the grip frame. also the way hes holding it close to his body there is no way he could fit a tank in that space.

[GA Devil]

its a different silenoid set up completly. And even with hyperframes before it was recommended sometimes mandatory to use ult with x valve.

Yeah in the vid im running straight off a full size tank with a remote line

[Load SM5]

Man I wish we had video taped that day at the scenario game. I shot around 300 rounds of nasty old paint that had been sitting in pods in GA's trunk, on a hot day, for who knows how long. 150 rounds of this stuff through a HALO and it just sang the whole time, with no breaks at all. It was absolutely awesome. He had a level 10 bolt in it then and it had no kick at all above a normal LX mag.

Believe me I'll be getting an upgrade before too long. Just waiting to see what the eye covers and new frames re going to look like.

[rx2]

Is there any disadvantage to using a solenoid setup similar to the one used in your frame? That is, it seems that AGD could have switched to a similar style solenoid, back before the lawsuit, and take full advantage of their ULT. I wonder if he was just set in the design, or if there was some other concern about the use of a different type of solenoid, such as cost or durability.

[Enemy]

alright heres my question is the solenoid in that the same as the hyper frames or is it a modified one..

[GA Devil]

same style silenoid.

[barberjohn]

so same style as in you keep the same solnoid, or do you change it out with another one of the same style. i am wondering this because my hyperframe has a messed up solenoid, and just wondering if that would cost extra if i used that hyperframe to devil man my mag. also, can we just keep the board in the hyperframe since your not going to need it?

[GA Devil]

yeah you keep the board if not i send it back anyway. I dont keep anythign I take out it all goes back to owner. As for silenoid They are the same as the hyperframe style If you need a new 1 i can get you one and get u a price if so...wont be much.

[kramer]

yeah you keep the board if not i send it back anyway. I dont keep anythign I take out it all goes back to owner. As for silenoid They are the same as the hyperframe style If you need a new 1 i can get you one and get u a price if so...wont be much.

Hey Devil - could you PM me your price for the solenoid?

[barberjohn]

Hey Devil - could you PM me your price for the solenoid?

same here .

[magman#1]

how far is the place that makes devil mags from birmingham