Need Cocker Tech

[SuiciDal Sn Y p ER]

yes, snyper has messed up yet another marker. This time it's a Psycho Ballistics Superbolt Autococker. When i got it everything worked fine, today at the field though i blew up a hose on the 3-way (it didnt come loose, it BLEW UP). Ok no biggy, i'll just replace it. Well...i replaced the hose and i gassed it up and the hose flew right off. Now i read some instructions and used a clamp thingy...well...the hose blew up again...and again...and now im scared to try a third time (cause this thing is LOUD!). i completely took out the spring out of the lpr so...assuming that taking out the spring would make the gun have very low pressure...well....the thing blew up. I took my regulator and turned it to the absolute lowest setting possible (WGP Stock Reg). well...the thing still blew up...so uhh...yea i have no clue what is going on.

help...???

..please?

SnYpER

[Skoad]

which hose is blowing on the 3 way?


turn your lpr completely off, so when you pull the trigger nothing happens except maybe a burp. Then gradually turn it open and pull the trigger every second or so until it fires and fully cycles. Give it a few quick pulls to make sure its getting enough air, if not open it a tad more.

[Blazestorm]

Some regulators unscrewing OPENS the regulator allowing MORE air to go through.

Also Assemble the LPR and unscrew the front of it to lower the pressure the best you can.

Now try gassing it up

I'd also try a new LPR, Pyscho Ballistic cockers suck, like really

[SuiciDal Sn Y p ER]

Some regulators unscrewing OPENS the regulator allowing MORE air to go through.

...well, i guess i'll give it another try

[Blazestorm]

Try using a different LPR as well... like I said those suck (a stock one would be fine)

[SuiciDal Sn Y p ER]

how in the heck do people stand autocockers?

once i think this thing works something else goes wrong!

[Blazestorm]

It's a POS

Cockers rock when you get good parts

[SuiciDal Sn Y p ER]

ok ...i just blew up 2 more hoses... what on earth am i doing wrong?

this is the middle hose that leads to the lpr. the thing was inflating before it blew up. so...uhh....i probably have another 2 more chances to blow something up before i stop and have to buy more hoses

[Blazestorm]

New LPR.

What's happening is well the LPR isn't doing anything, it just sits there and allows the air to flow through, so whatever the pressure the inline regulator is set at is what's going through the hoses, which isn't good, they aren't rated that high

[SuiciDal Sn Y p ER]

i'm using co2, does that play a major role in the blowing up problems?

[Blazestorm]

no because the stock regulator regulates the pressure down.

It's your LPR that's the evil one :o

REPLACE IT D:

[FallNAngel]

Snyper: I have a KAPP Rhino LPR that you're welcome to if you'd like. Externally adjustable and I never had a problem with it. Only problem is there's no nipple... If the one you have will fit it, you're welcome to it.

I also agree, it sounds like a bad LPR if both ranges blow the pneumatic hose.

*edit*
I'm in Joliet BTW

[SuiciDal Sn Y p ER]

yes! i will take anything!

[Flow_Tech]

i have teh solution!...find your nearest 5+ story building..and..well...drop away!

[SuiciDal Sn Y p ER]

er...no?