Advice on Inline Reg

[lord1234]

I want a reg that works as a screw in...i wanna be able to screw a preset tank into this reg and then adjust the pressure via the reg...do such things exist?

edit: The reason for this is to lower the input pressure into the valve to help prevent bounce...effectively turning a screw in preset into an adjustable tank!

[FallNAngel]

Yeah, Palmer sells them... it'll be a form of the Stabilizer reg... lemme see if I can find a link

Here ya go... Female Stabilizer

[xXHavokXx]

PMI THOR reg.

i heard they are heavy and poopy as regs.

[lord1234]

while those are good suggestions...is there anything any smaller/ that would be compatible with my Xmag and a Endo cradle? gosh that would be useful...

or should i get an inline reg and somehow attach it to the tank and run some macro up under the tank cover and put it there?

[FallNAngel]

There's no need for a regulator on an XMag... it has it's own internal reg... just screw your tank in and you're done.

[lord1234]

thanks...i know that..but i have a preset tank

and want to be able to adjust without buying a new tank...thanks though

[FallNAngel]

Well, then you're going to really run out of options... you may want to get a unimount and try sliding the stabilizer in that... that's really about it.

[WingMan13]

Lets say you have a preset tank with a 800psi output...somthing like the Palmer reg wont let you adjust anything higher than the tank output would it? And anything less would just starve the XMAG? Is this correct, anyone?

[space_weazel_45]

correct, if you wanted to get higher pressure in the gun for more reactivity you would need an new bottle reg, something like and old max-flo wil go higher, many of the regs now are 1000 or less for tuning down the pressure not up.

[lord1234]

thanks guys...obviously i want less pressure...mags run fine off of 650 psi...

[Hexis]

All you are going to do is starve the valve. What benefit do you think you are going to get by adding a third regulator to the mix?

[lord1234]

no reactivity...

i wanna starve the valve just enuf so that it can't bounce!

duh!

[lord1234]

and i dont care about the BEST consistancy in the reg...if its +- 30 psi each time..then i am happy

cuz i know that will be enough to stop the marker from bouncing 90% of the time!

[sneakyhacker420]

IMO the THOR is a decent option, or if you want to do a little more work, find a bottomline maxflo (the one that u screw any tank into) - they'll usually come on imps and old shockers, take it and get the HP spring from smart parts and replace the 250 PRV with a 1/8" NPT plug



THOR would be cheapest and easiest route, plus its not 3" tall on an endo cradle



edit: or get a sideline stab. thats directly connected to the valve, and then your preset feeds that

[FallNAngel]

edit: or get a sideline stab. thats directly connected to the valve, and then your preset feeds that

Actually, I hadn't thought about that... he said he wanted something for his tank to screw into and I didn't even think of that. If you have to get another reg in there, I'd definately go with this route if you *must* get another reg in there.

Personally, I'd just play in E-Mode until you can save up enough to buy an adjustable tank