New to timmys, need help plz

[$tevo]

rr is correct about both. the modes and it does have to be the allingment. i gotta go get my tank filled before i try anymore.

[The Action Figure]

sorry when my cocker didnt shoot is was because the detents were too tight Im too poor for a timmy

[$tevo]

well i think the detents were too tight. thats why it wasnt feeding the balls in..but the eyes are also unalligned, thats why it wont shoot

[RRfireblade]

The detent issues seems odd.They really shouldn't have any effect on feeding. When the guns cocked,and you look into the feedneck,where's the bolt sitting at rest? Should be like 1/16" or so showing in the breech. If not, unscrew the ram cap and make sure the o-ring on the back of the ram is still there and seated properly.On the ALIAS you really shouldn't need an adjustable cap if everythings set up correctly. But perhps someones been in there 'fixing' stuff.


(You can AIM me if you like)

[black_bishop]

doesn't the alias come with an adjustable ram cam similar to the hybrid one?

[RRfireblade]

It's a 'new style' w/ an intregate bumper and blow by valve but it's not adjustable and 'normally' doesn't need to be on 2K4s.

[$tevo]

ok, i took it to the field, and they got it workin for me..it was all setup for low pressure, and i was running hp. so they got it all setup for hp but it wasnt running as low as it should be, and i had some left over money to spend, so i bought a evil scion to use with it, got it for 350. now im going to have to reset it up for lp

[RRfireblade]

Interesting.....

I have run both of mine on HP and on LP (input I assume you mean). I've never had to 'setup' anything to switch to the lower input tank.

Strange.....

But...as long as it's working good now,that's all that matters. :)

[$tevo]

well the guy who had the marker before me was running his at 65, i had to fool around with the reg and stuff and it started to run fine around 90psi

[RRfireblade]

Your talking about LPR pressure then.

65psi is pretty low, 80-90psi is a good range to run it at, just keep it under 120max and preferably 100psi or less.

All that controls is the movement of the ram/bolt. Too low of a pressure(which some people prefer run for no good reason)will usually have a negative effect on your consistancy.

All you need to do is adjust the LPR to the pressure you'd like it to run and then re-chrono,adjusting the velocity with the HPR(vert reg) and your good to go.

Either way, glad it's working now. I'm guessing you got the eyes aligned then?