RT ULE vs. Impulse/Timmy/Whatever using a Revvy...

[Automaggot68]

I agree with RRfireblade and TheTramp.

Have any of you thought abought this question, if it were asked five, ten years ago? This turned from ' What gun should I buy, i use a revvy', to comparing electrocs, and their 'specific' purposes.
I say stick with a mag. My Classic Valved mag's trigger pull is pretty short, because of my trigger stop (installed by Bad_dog, grreat work ) and the pull is already pretty soft, so ROF isn't an issue for me. Comparing the trigger on a mech mag (non ult) to a timmy(or DM4, angel, etc) is freaking stupid.

Edit: Alot of posts i've been reading nowadays regarding ROF issues, Electros, etc, they all seems to turn into ' HEY! I RELY ON MY HIGH END MARKER FOR ELIMINATIONS !'

[abunkerer]

I Know that on an impulse with vision a force fed hopper such as a halo is best. The reason for this is because of how the vision system works. It wont allow the gun to cycle untill it "detects" a ball, after that the gun can be fired...sounds good, but it isnt...If the vision detects a ball it is set to be fired after this point no matter what, even if you remove the hopper and the ball degass the gun, anything, the gun will cycle the solenoid. So if you have a revvy that doesn't keep pressure on a stack of balls on the feedneck and you are running and the balls are bouncing around in your breech the vision will detect a ball and be ready to fire, and a ball may be bounced halfway up into the feedneck "chop"
break beam eyes dont work this way, if the ball moves out of position for some reason the gun wont fire untill the ball is in position and the beam is broken again. I can throw an old vl200 on my matrix and rip shake and rip without chopping.

[elpimpo]

ahhh the good old rip and shake, reminds me of the good old days,