Do Warps actually work?

[1ofkind]

I really can't argue with that... I was told what I said from another party. Probably thats true because it really does make sense; but, for what 10$ atmost you can get warp it self modded to feed faster.

[Havoc_online]

The problem with warp speed is that it depends on If the person is using it properly. Too many factors are able to slow it down so the warp usually isnt doing what it can. Things like disk lubing, fresh batteries, pinched feed tubing, old drive o'rings, plug alignment, bore spacing, plus a few others.... Most people want to plug and play without paying attention to detail, this is why it's sometimes better to mod the warp so that in any case it will feed fine.

For those who think the warp itself can not be made to outfeed anything else, they have been tested to feed over 75bps.

[ilikePB]

The warp has adjustable sensitivity. The level 10 mags have very little kick and it works fine on them. If you have to make the warp too sensitive though, it will spin every time you touch it.. but I dont think the freestyle has THAT little kick. If all else fails you can rig up an intellifeed.

I'd say it has about as much kick as a matrix(pretty much none). But if the sensitivity can be adjusted to the point where when you touch it it spins it'll work.

[personman]

Well, I've never shot a matrix either.. haha.
But yes, you can adjust the sensitivity to the point where its so sensitive that it wont stop spinning. I dont think you'll have a problem..
Like I said if all else fails you can rig up an intellifeed, it isnt that hard.

[ilikePB]

Well, I've never shot a matrix either.. haha.
But yes, you can adjust the sensitivity to the point where its so sensitive that it wont stop spinning. I dont think you'll have a problem..
Like I said if all else fails you can rig up an intellifeed, it isnt that hard.

Cool, thanks for the help.

[trains are bad]

PS: you owe me that picture so I've added it to my Dealers thread

cool. The elbows work well, and I'll be using them on my warp. I bought a new one off Tuna. Can't wait till it gets here. I already have my intellifeed setup built.

[m20power]

I bought a warp for 35 dollars on ebay. Honestly its one of the best purchases I have ever made. The wires were messed up but a few miniutes with the trusty soldering iron and it was back to normal. I then went to radio shack and bought a 7812 voltage regulator for 2.00 dollars and some heavy duty 9v conectors for another 2.00
I then set it up with the batteries in series and had then go into the voltage regulator so the board now gets 12v.

I am in love with it so far. Half the time I was shot out used to be on my hopper. Now I can play so tight its amazing. After awhile I thought it was making no difference so I switched back to the hopper on top to see the difference. I started getting shot out much more, I couldnt shoot like I used to. With warp you can get people out by shooting from crazy angles that people wont expect.

Another added benefit. my gun stands up on its own. The nitro tank and warp feed act as a base. Tres awesome.

BTW Im shooting a 2k1 LCD cut and carve with an apocalypse nitro tank warp evo 2 and a boomstick. And you think your guns heavy.

[Strider]

Someone mentioned the fact you had to disconnect the battery after use... There is an On/Off mod you can do to circumvent that.

Love mine. Just have to get around to finnishing that on/off mod. :)

PS - My warp was awesome before, but after I got an intelilink into my Emag, it was PERFECT.

[ilikePB]

How would you go about hooking up intellifeed to a Freestyle? Is it the same for all guns? I don't know how the intellifeed thing works. Thanks for the help.

[Mungojerrie]

I am looking at geting a warp and a ULE warp feed body. I am right handed and usually aim with my head at the left side of my marker. My thought was to mount it on the right. I however don't see them mounted on the right very often. It seems like everyone has it mounted on the left. Is there a reason why? Is one recomended over the other depending on whether your right or left handed?

[personman]

I am looking at geting a warp and a ULE warp feed body. I am right handed and usually aim with my head at the left side of my marker. My thought was to mount it on the right. I however don't see them mounted on the right very often. It seems like everyone has it mounted on the left. Is there a reason why? Is one recomended over the other depending on whether your right or left handed?

I have mine mounted on the right. The only reason for that is because I'm left handed. If a righty mounted his warp feed on the right, he wouldnt have room to put his hand on the grip frame... and it would be very uncomfortable.


As you can see, in that picture, there is very little room for a hand to squeeze in there.

[ScatterPlot]

Unless you shot only out the left side of the bunker, then mouning a warp on the right if you're right handed would defeat the purpose of the warp. The hopper would stick out even more, not to mention the no room for your hand thing. Don't worry about the aiming thing, unless you like to just smash your face against the side of the gun and fire it next to your ear, you really can aim OK. Just kinda put the gun in front of you and you can see over the top some and along the side. There is a gap next to the gun and the warp.

[Target Practice]

I've been debating getting one as well. The last time I played, I took three successive shots to the front of my HALO. I just want to play with one before I commit. Hmmm, Sarah left her warped Emag here when she left for IAO...

/me goes to do a little product testing

[trains are bad]

Personman, that is one sweet looking setup. Did you achieve that with the stock agd mounting bracket?

[ilikePB]

How would you go about hooking up intellifeed to a Freestyle? Is it the same for all guns? I don't know how the intellifeed thing works. Thanks for the help.

Anyone know?