New! Lady Silhouette Grips

[nt2004]

I'll post a picture of those also, the verts match up perfectly with the angel grip, so I don't see any problem with those. I'll probably have a promotional sale for those as well, see the link above for pricing under summer sale.

I have one of rougefactor's 90* frames. It fits up perfectly with the angel skins i bought but i'm not a big fan of the skin's colors. I'd like to get some just black ones to replace them. If they fit an angel, they should fit the vert frame perfectly

[The Frymarker]

ahh okay, I'm waiting for a rogue frame and his grips to come in, we just want to be sure before I cut anything that they will fit, the last batch I cut for the verts were wrong as well, there was a problem when one file I made was imported into the cad software, the measurements came out wrong, so now I have fixed that problem, and I'm just waiting for the frame.

Keep an eye on my Summer Sale thread that there is a link to above.

I will post in there when I have some vert grips done that will fit both the Logic and Rogue frames, it won't be long now.

[Tunaman]

Heather. Awesome looking grips! I see you have a Square cutout for the LED Window on the Emag grips. I would make it round on the ends like the factory ones and make sure the plexiglass window fits in there real tight. You dont want this window falling out everytime you take the grip off.

[rdb123]

Heather, could you make panel grips that follow the same shape as an Alias Intimidator's frame? THanks

[The Frymarker]

Thanks Tuna!


I'm just trying to take everyone's suggestions and do the best I can to fulfill everyone's needs.

The new grips Tuna, the window is a part of the grip, what I do is I pour the color that the customer wants, for instance red, first, then I add clear to the back.

When the grip is demolded I then fill in the rectangle with clear and now there are no more windows to cut out, or get lost The window part is now crystal clear.
Pretty neat!



RDB I can make a grips in just about any shape I just need the frame to and the stock grips to work with.

[dj89]

i'd be gald to wait how much should i send you? do you want my xmag to get a better fit?

[mobius]

i'd be gald to wait how much should i send you? do you want my xmag to get a better fit?

She already fixed the X-Mag fittment problem. Because the grips you already purchased from her don't fit, she's offering to send you a free set of the new style that do fit properly.

[The Frymarker]

Hey LUCY YOU HAVE SOME SPLANIN TODO


Okay I'll do my best no to explain how I fixed issues and how issues came about with the Emag/Xmag grips.....


First before I even had the mill I received feedback if I could change the stocks and add a little bit extra to cover these spaces, photos 1 and 2





So I set out to address those problems when I got the mill see grip version 1 photo 3



So I address the issue of it being wide enough, however I don't have an xmag frame and this is where I ran into problems, like yours DJ89, the top wasn't long enough for the xmag frame, the space up at the top now need to be covered for the xmags.

See photo 4, these are new grips made to stock measurements they cover more space but there is about 1/16th that isn't covered in that one area.



Now I decided to make the oversized version of grip but it may be a little too wide for the xmag frame, but not the emag, the emag has enough room for the extra part of the grip to cover all areas. The oversized on the xmag may hang over, I'm not sure yet because I don't have that frame, and I am waiting for the mold rubber to come in to make those grips. I only had enough rubber to make that version 2.



Here are the grips side by side, the only one missing is the oversized which isn't molded yet.

Here are all of the new protos that have the correct length, the 3 on the top are wider width to cover everything and the 4 on the bottom all to stock measurements.

Depending on your frame and what you most want to cover you can pick and choose what size grips you want.

Like I said I did my best to make everyone happy, those people that ordered the version 1 are getting new grips from me very shortly.



I hope I explained it so everyone could understand

[SniperSmurf]

In your initial post, in the picture with the two grips side by side, is the one on the left for a Y-grip or is it just the other half of the .45 grip?

[rdb123]

Thanks Tuna!
RDB I can make a grips in just about any shape I just need the frame to and the stock grips to work with.

Heater, what if I just send you the stock grips and just have them made to that shape? Also, would it be possible to get them in see-thru? Are these soft and squishy? Thanks

[nt2004]

ahh okay, I'm waiting for a rogue frame and his grips to come in, we just want to be sure before I cut anything that they will fit, the last batch I cut for the verts were wrong as well, there was a problem when one file I made was imported into the cad software, the measurements came out wrong, so now I have fixed that problem, and I'm just waiting for the frame.

Keep an eye on my Summer Sale thread that there is a link to above.

I will post in there when I have some vert grips done that will fit both the Logic and Rogue frames, it won't be long now.

I dont mind waiting, i dont have the money right now anyways

[68Classic]

Frymarker, you've got a PM.

[The Frymarker]

Snipersmurf, those grips pictured above at the top of the post are .45's, the y frame right now has .45 grips on it the are placed backwards.



RDB if you want to send me the grips for that frame I'll do my best, is the back carved out in any way??? I trying to steer away from carved back grip for the moment because they take a lot of time to make in which I'm running out of with my little one now learning to walk my time is getting shorter each day for certain projects. So let me know, if the back is just plain, then send them my way, but make sure it is when you can devote a couple weeks to letting me have them. Yes they can be clear, right now I have sucessfully made grips with a soft rubber top and resin backing to make them rigid enough not to cave into the frame but have a semi squishy feel to the top.


nt2004 okay I just got word from a little birdy that I should have a frame and grips really soon

68classic okay I pm you back.


DJ89 if you want to send me your xmag frame so I know what grips will fit the frame and what do not, that would help me out a lot because then I can suggest to customers what would best fit their markers according to the frame type. You can just send the frame, not the entire marker, unless you don't want to take it apart. It is up to you.
That way I can see what design would be best to cut the lady panels, stock or over sized.



On another note the right grip .45 is finished cutting and looks really nice. I am cutting the other panel now.

[Joni]

Heather, I'm very interested in a pair of grips to my logic vert frame. Red grips with a black lady would be nice =). If available, what vould the price be?

[The Frymarker]

Hi Joni,

Right now the clear is only going to be a part of the sale, I'll pm you with a price