difference between was 2.7 and 2.8

[dinger]

i know i havn't posted here in ages :o so hi everyone
also, was the smiley made in spite of me cuz im the one who suggested it.

[�?�� �m���]

wait what difference?

[dinger]

my thoughts exactly

[TeamNausea]

hes talking about was 2.7 and 2.8 i believe

[jonmcfatty]

on was 2.7 you can only set your debounce as low as two. With 2.8 you unlock debounce 1. That's the only difference I think

[cphilip]

The difference is 0.1 obviously.....

[Automaggot68]

The difference is 0.1 obviously.....

Cphillip, i've always loved that you're a smart***
::hugs unka::

[dinger]

on was 2.7 you can only set your debounce as low as two. With 2.8 you unlock debounce 1. That's the only difference I think

thats so lame

it shouldn't even go that low
it's not legal anyways

[flyinasian016]

on was 2.7 you can only set your debounce as low as two. With 2.8 you unlock debounce 1. That's the only difference I think

Do you mean to say that with WAS 2.8 you can just choose Debounce 1? Because on WAS 2.7 you can get Debounce 1 but you have to unlock it. The stock board settings on WAS 2.7 only allow you to get Debounce 2, but if you do a series of things you can unlock Debounce 1. So on WAS 2.8 you dont have to 'unlock' debounce 1, you can just choose it. I think thats what you mean, right?

WAS 2.8 is slightley faster then 2.7 too. But that doenst matter seeing how no one can outshoot 2.7.

[elpimpo]

Do you mean to say that with WAS 2.8 you can just choose Debounce 1? Because on WAS 2.7 you can get Debounce 1 but you have to unlock it. The stock board settings on WAS 2.7 only allow you to get Debounce 2, but if you do a series of things you can unlock Debounce 1. So on WAS 2.8 you dont have to 'unlock' debounce 1, you can just choose it. I think thats what you mean, right?

you wouldnt happen to know how to unlock it would you, because ive heard a few things but they didnt work.

[P8ntBallBoom]

Here we go, people trying to find ways around manufactureres locks so that they can ultimately hurt themselves or someone else when they bounce way too much....

[flyinasian016]

Use at your own discresion (i slayed that word )

Ok here are the instructions:
Hold the trigger down and turn the gun on and then release the trigger. The light should be red. (your lcd screen will have a bunch of squares but this is ok)
Click the trigger one time and the light should turn green.
Hold the trigger down now until the light goes out and then release the
trigger.
Wait a few seconds and the light will flash your current debounce setting (if your debounce is 3 it will flash 3 times, debounce 8 flashes 8 times and so on).
After the light stops blinking click the trigger 250 times. (I highly reccomend you count as you click each shot, it only takes a minute or two.) You do not need it to be exactly 250 but try to get at least 240. It is much better to be short than to go over 250.
After you finish clicking the trigger wait 5 seconds and the light will flash rapidly. After it finishes flashing, turn off the gun.
Now turn the gun back on and go to the menu by holding the two buttons down and then press the left button to go to debounce.
Select debounce, it should be between 240 and 250.
Now press the left button to raise the debounce up.
It should go to 255 and then when you click it one more time it changes to 0.
Now click it once more and it will go to one.
Save it by holding the right button down and your gun will have debounce 1.

If you get caught cheating, not my fault

[�?�� �m���]

haha it should be your fault cause you instigated it

[flyinasian016]

Ohh, i didnt instigate anything. At first i was just clarifiying what Jonmcfatty said, and then elpimpo came and asked how to do it. Its not like i was saying, "blah blah blah, someone ask me how to get debounce 1 because i know how to, blah blah blah". But anyways, its just an informable post

[elpimpo]

i thank you for that infprmative post, also i hear the 2.8 cycles faster like the 2.2