Marker Cloning!

[Z-man]

Z-man, you got it! The originals are 1600x1200, about 500KB a peice. Would you like an email(s) with all of them?

Ps. They do need a touchup with photoshop, which is mainly shrinking the photo's a little to gain back resolution, since my camera wasn't too great for taking the pics, and they came out a little pixalated at the original size.

I can resize them all to 1200x900 and touch up with photoshop before sending if you would like.

I also have many hi-res pics of some other mags

Sounds good to me, I like 1600x1200. I always prefer them to be larger than I need as it means I can get them looking that much sharper on cleaner in PShop. There is not one photo in my gallery that is not tweaked a bit (and some tweaked quite a bit). E-mail is great.

Take a look around the gallery and see how its all set up. You can see that I am entering some basic info about each marker. I am kinda looking for the "classy" markers as you can see.

http://www.zakvetter.com/Pages/Paintball/Gallery/gallery.html

[paint magnet]

Nice mags, couple of questions for you:

-What kind of aftermarket double trigger is that on the stock frame? (fist mag)

-What kind of tourney lock is that on the back of the valve, and where can I get one?

-How much for you to mill my rail to look like that one? (or you could make it slightly different, so yours would still be the only one...lol)

[OysterBoy]

It looks like you made that from scratch, my AM rail doesnt even have enough meat on it to do that! But if it was from an AM rail, would you mind giving me some pointers? All work will be done with a dremmel, at my risk.

[Snertz]

Z-Man: You've got mail!

Nice mags, couple of questions for you:

-What kind of aftermarket double trigger is that on the stock frame? (fist mag)

-What kind of tourney lock is that on the back of the valve, and where can I get one?

-How much for you to mill my rail to look like that one? (or you could make it slightly different, so yours would still be the only one...lol)

The double trigger was just a no-name one that I found in the case at my local shop. the closest thing I could find to it was this

The tourney lock on the valve is a benchmark tourney lock, and can be found here

As for carving a rail for you, just PM me and we can work from there. I already have some others contact me about doing some. If you have a different design in mind, just email me a sketch at [email protected]

[paint magnet]

Thanks for the links - I might have to get one of those Benchmark tourney locks since PBGear marked 'em down so much ($11.99 to $11.95).

I'm still in the process of getting the rest of my mag together, so any milling/modification to the rail will probably be the last thing I do. I'll try to come up with a sketch though

[Snertz]

It looks like you made that from scratch, my AM rail doesnt even have enough meat on it to do that! But if it was from an AM rail, would you mind giving me some pointers? All work will be done with a dremmel, at my risk.

These were all stock AM/MM rails at one point.. There is a surprising amount of metal on then. you should see how much I actually have to cut off just to get the basic shape down.

Paint Magnet: NP just lemme know when you want it done. Prices aren't as much as you'd expect...I think

[Z-man]

Your Mags are up sir! Go check and make sure I got all th info right when you have a chance.

http://www.zakvetter.com/Pages/Paintball/gallery/gallery.html

[Snertz]

It all looks good! Thanks!