Timmy questions, Pre and Post 2k4 models.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TraXeR
    Registered User
    • Sep 2002
    • 1761
    #1

    Timmy questions, Pre and Post 2k4 models.

    Question for those who know about the pre 2004 (2k2, texas storm, ironman, etc) and post (alias, naughty dog, russian legion, etc) intimidators.

    Do they BOTH use .45 grips? And are they interchangable? If not, what difference does it have in the molding and appearance? Also, for anyone that uses the timmies, can you give me the exact measurement on the grip screw holes from dead centre to dead centre of each hole in inches please?

    Thanks a ton guys.
    'people should not be allowed to own paintguns which are smarter than they are'

    -Sparq
    Tags: None
    • Load SM5
      Scruffy Administrator

      • Oct 2000
      • 6772
      #2
      Yes, they both use standard 45's but the 2k4 versions have an LCD screen on the frame so you'll need to cut a window if you want to see it.


      Moorewatch

      If you read this, thank a teacher.
      If you read this in English, thank a soldier.

        Comment

        • tribalman
          Registered User
          • Dec 2002
          • 719
          #3
          i thought the classic timmys used a 45 frame, but the frame screws were at a different placement so you couldn't change the grip. and then there is the clamshell grip and i dont know what the newer timmy's use.
          e-mag 226
          flashed with 1.31

            Comment

            • WenULiVeUdiE
              Force of Nature Staff
              • Jan 2004
              • 1982
              #4
              2k2's etc. use a .45 grip. The new 2k4's do as well. Except they have an LCD panel on the right side in the middle like load SM5 said. Just cut out a rectangle for the lcd panel and it'll be good to go. I;m not sure about the classic's though.
              Hey, look at that! It's Santa!

                Comment

                • TraXeR
                  Registered User
                  • Sep 2002
                  • 1761
                  #5
                  K, thanks guys, got everything I needed. I was making a template for the grip for Heather to use for if anyone ever wanted a timmy grip and I needed to know if I could use the old .45 grip template and put the border around it, or what. Anyways, its all done now, thanks.
                  'people should not be allowed to own paintguns which are smarter than they are'

                  -Sparq

                    Comment

                    • The Frymarker
                      #6
                      Anyone want to throw me a linky where to purchase the Timmy grips with the lcd panel???

                      Thanks

                        Comment

                        • Load SM5
                          Scruffy Administrator

                          • Oct 2000
                          • 6772
                          #7
                          Here are the only pair I could find. http://www2.criticalpaintball.com/pr...roducts_id/333

                          If you do make them, leave the LCD window cut out. The new ones have such a thick piece of clear in there that it distorts the LCD screen and makes in next to impossible to read. People usually just cut those chunks out.

                          I need some tick Alias grips to go with my SFL grips you made.


                          Moorewatch

                          If you read this, thank a teacher.
                          If you read this in English, thank a soldier.

                            Comment

                            • The Frymarker
                              #8
                              Originally posted by Load SM5
                              Here are the only pair I could find. http://www2.criticalpaintball.com/pr...roducts_id/333

                              If you do make them, leave the LCD window cut out. The new ones have such a thick piece of clear in there that it distorts the LCD screen and makes in next to impossible to read. People usually just cut those chunks out.

                              I need some tick Alias grips to go with my SFL grips you made.

                              Hey thanks Load!

                              All of my new grips come with the windows built in as part of the grip, it is just easier for me to make them this way and they come out much cleaner. Their thickness depends on how much resin I stick in there. So if clarity is an issue I can make the windows really thin.

                              Tick grips not a problem

                                Comment

                                Previous template Next
                                Working...