Anyone got info on the Evil Pimp?

[Ratzo]

My local shop just got in an Evil Pimp and I was wondering if anyone has had any expierence with it.
What's your opinion?
And why does it have Impulse threads instead of Cocker threads like the Omen?

[thump]

hears a link that will help ya bud.

http://www.pbnation.com/forumdisplay.php?s=&forumid=263

they are really helpfull there most of then time..you may have to put up with some bull for some little kids but for the most part they will help.

[68magOwner]

its an imp with milling and beambreak eyes

[GotMag?]

I'd take it over an imp any day

[_tMAN]

I'd have to agree with you GotMag?.
for one thing it looks so much cooler than an imp

[thump]

it really isnt like an imp.
the milling is all different btu the insides are alos ALL different
it has different wiring,bolt..ect....
do some reading and you will see.

[Torbo]

the frame and trigger are mad wierd tho. it was way to strange for me to shoot fast when i tested it.

[SpecialBlend2786]

It's kind of a mix between an Intimidator and an Imp. Pretty sweet

[Koop]

I shot one a couple weeks ago and I must say, I really like the trigger on it. I picked it up and could rip on it right away. The owner was saying something along the lines of a 1500 shot reg break in. Confirm/Deny?

[rkjunior303]

koop, any reg takes a certain amount of shots to really break it in..

[shorty13]

it is more of a timmy than an imp with the clamshell design and everything, the stock barrel is very nice. the detonator reg is not the best but it isnt bad. we have had 3 of them go through our shop all of them ripped with paint. they have a cap with eyes off. again the milling is sweet. it has feedneck with o rings. it is tight. it is a timmy in the body of an impulse with good milling.

___casey

[Duke Henry]

Honestly, I would recommend getting your hands on one of the next batch of them.

My teammate bought one, and out of the box the reg needed to be replaced. We swapped it out, and since then we have put over a case through it, and it is finally starting to shoot somewhat consistently.

Out of the box, you couldn't use it in a tournament since the variance between shots was just too great.

The anno isn't very impressive on the initial runs either.

Trigger wise, some people can really rip on the small, backwards angled trigger. I am not a fan of it, but it is extremely adjustable, so I could probably get it the way I like it.

It is light and tight, and well balanced.

Overall, I would pick up a 2nd or 3rd batch gun, once they get the initial problems worked out...

[gc82000]

They are truly ugly guns but i have no experience with any type of evil gun. But I hear the omens are pretty tight.

Here I go making an ignorant comment again.

Ok this is what i have found.

http://www.evil-paintball.com/pimpkit.htm

This is the site for the pimp kit. And a list for what is included with it, If you dont want to look yourself. Pimp Kit

Pimp Specifications:
Electro-Pneumatic Open Bolt
Un-Capped Board for insane rate of fire
Trigger sensitivity, Ball delay are adjustable electronically
Adjustable ROF (eye off)
Break Beam ACE System
15/16-12 DL Barrel Threads (same as impulse markers)
Adjustable Respirator LPR
Evil 300 PSI LPR Gauge
Twist Lock Teflon Bolt - no visible bolt pin
Dual Ball Detents
Tray-less Trigger Frame
Shortstack Feed Tube with o-rings to fit different hoppers
Magnesium Eye Covers
Magnesium Trigger
On/Off Bottomline
Macroline
Detonator Vertical Regulator
Pipe Barrel Tip, stock .689 PimpKit back
Evil Punch 2
Barrel Centering O-ring
Evil Grips
1 oz Tube Pus

They are still ugly in my opinion. Just being honest.