x-VALVE w/ Stock trigger frame Question.

[spawnboy]

I have a stock AGD trigger frame with just a single trigger and I'm having trouble with it going reactive. Any one have this set up or expeirence in this topic please help.

Thanks,

spawner

[mfalcone15]

i just got my RT-ULE at IAO. It took a little tuning, but it works perfect now for me, i had to use a lot of shims though, especially in the on/off, i have the ULT in it though. is ur tank an adjustable output? the higher the output the more reactive i think, correct me if i'm wrong.

[Chronobreak]

yeah what kinf of tank u using, ult?,more than 1,000 psi in tank? well oiled?

[spawnboy]

xsetup

Well, it's not mine so yeah I'm the guy getting it running from a new start.
I oiled it a lot and the tank is a maxflo with psi at 900, my scuba is low and only filling at about 1000. No ult....I'm sure my velocity is up cuz the nut is close to as far as it can go on the valve. If i tighten it any more it starts to leak out the back.

[Chronobreak]

really think that u need some more air.. take the on/off out and the pin too and get some oil isndie their..also what spring?

[spawnboy]

[Chronobreak]

red or silver ? id use red or gold til the valve is broke in better how many shims in ult?
did u cahnge anything from when it was sent to u ...they are pretty reactive out of the box most teh time

[spawnboy]

xfirst

Its the goldish spring that's clipped, I think 3 shims in the valve.

Ok so im not the first to toy with it. Who ever had thier hands on it first didn't spend much time and had to small a carrier and the main spring in it. 2 shims and it has sat for months till now.

[Chronobreak]

ide try the red spring,largest carrier that doesnt leak,oil it well. more input=more reactivity its also ALOT easier to sweetspot with a double trigger. 1 shim is recomended unles teh bolt doesnt return after a shortstroke or pinch then add 1 i dont think u should use more than two shims. and adj velocity accordingly as well u should be set to go