Tes Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PaintballMaster229
    Registered User
    • May 2004
    • 118

    #1

    Tes Problem

    i just got my c02 tank filled and when i shot my gun the ball when nowhere and it uncocked itself and sometimes it makes the noise like it is out of air.
  • tippmannsniper-
    dont have a tipman, really
    • Jun 2004
    • 575

    #2
    same thing happened to me

    check your o rings and OIL your bolt good also adjust your input pressure ( first screw in your tank use the big set screw on your regulator and adjust the input pressure watch the guage and screw it out (set screw) until the guage reads in the green part around 450 psi to 500 psi)

    hope this helps
    E2 VF-TACTICAL,shocktech pnues and beavertail,tactical kaner kit,shocktech supafly,shocktech mini drop and on/off ,all black :ninja: :ninja:

    Comment

    • WenULiVeUdiE
      Force of Nature Staff
      • Jan 2004
      • 1982

      #3
      Your tank may not be flowing enough. Make sure the tank is not all the way, but not too far out. Try turning it all the way, then 1/2 or 3/4 of a turn out. That could be your problem.
      Hey, look at that! It's Santa!

      Comment

      • Jonno06
        AKA Jon-no wang
        • Jan 2002
        • 4392

        #4
        what is a tes?



        (sorry, ive been outta the sport for awhile..)

        Comment

        • WenULiVeUdiE
          Force of Nature Staff
          • Jan 2004
          • 1982

          #5
          TES is here.
          Hey, look at that! It's Santa!

          Comment

          Working...