Single Trigger E-Mag Please

[Panzerr]

Put out or get out. Sometimes you've gotta lose money to make money. First rule of business.

[Thordic]

Panzerr, you are awful demanding for someone who is pretty much a lone voice right now. If you want a single trigger frame, go out and find enough people who would pre-order one to make sure Tom would make money.

If he's going to lose money, he isn't going to make it. He may be the manufacturer, but he does not solely exist to make YOU happy.

And its "You have to SPEND money to make money" not lose money to make money. At least get your cliches right.

[Panzerr]

If I'm going to drop $1400 on an SFl, you're d*&# right I'm going to be demanding. I don't have a magical paintball money tree. I work hard for my money and want to get exactly what I like if I'm going to spend it. I believe everyone can relate to that.

I'm not going to find people that want to "pre-order" a single trigger. However, I will and am trying to make it known that there are people out there that would like a single trigger E-Mag. Since some of the AGD crew frequent these forums, this is the logical place to post it.

Thordic, I didn't say that AGD had to exist to simply make me happy. I find that comment very childish and wonder why you saw it necessary to drop to that level on a friendly forum. Did I fart in your house? I don't think so. Is it a sin to prefer a single over a double? I don't think so. Just as I am adamant about a single trigger, many others are adamant about the double. That's fine. So be it.

[Cha0tic]

panzerr, there is not a high demand for a single trigger. therefore tom will not make it. it is kinda like what happened with the z-grip. tom wasn't making money on it, so he just dropped them from shelves.

i know how you might be able to be helped though. call dan at triggernomics. he can work magic with triggers and may be able to design a trigger that would be single finger, and low enough for the magnets to work with it. you might have to pay some good cash for it though. www.triggernomics.com

[manike]

Panzerr I will make you a single trigger frame for your E-mag.

For the design time and machining I reckon a one off for you would cost about $5,000. If you find two people I'll do them for $2,500 each

Designing new product and getting it to manufacture is a costly and time consuming business. Priorities are set on what will actually create demand. Demand at the moment is double triggers so it's doubtful if it would make financial and business sense for AGD to do single trigger frames. Especially not at the same price that you are used to for a double trigger frame. Their product priorities are quite rightly else where at the moment.

In business supply and demand rules. If there isn't enough demand to make something profitable then you don't supply it. Or you provide a limited supply and cover your costs. That's what I would be doing for you.

Considering the time it would take me to design a single trigger frame from scratch to fit around the E-mag components (it is far more compliacted than any other frame in existance) and to get it machined I think my price is fair. If you can find more demand who are willing to pay up front then the cost will drop.

If you can find 100 people I'll get the price down to about $150...

manike

[Thordic]

I don't care if they have to redesign the trigger frame.

I really don't care. I just want a single trigger.

You were the one who was being childish and immature. You are coming across like a 3 year old whose mom won't give him cookies. Saying "Give me what I want or I'm going somewhere else" isn't going to get you what you want, it'll just get everyone to wave you goodbye.

As for getting exactly what you like, this isn't a fantasy world. No one ever gets what they want. You think that SP would make a special effecient shocker just for YOU because you told them if they didn't make an effecient shocker you'd buy another gun? Do you expect WGP to make a cocker that takes mag barrels because you "like the twist-lock system"? Do you think WDP would make a 3-stacked tube design because you don't like the 1-2 tube design? No. These companies would laugh at you. Why do you expect AGD to be any different?

Good post, Manike

[manike]

On second thoughts... having re-read your original post.

It wouldn't be that hard to make a trigger that would allow you to use a double trigger frame but still get the bottom finger behind the trigger. If that's all you want then I expect several custom houses could do it for you.

You could probably modify one your self or make your own...

In fact looking at a frame I have here I would say it wouldn't be that hard to do at all. You could recess into the frame behind the bottom finger point below the HE sensor, this would make your finger rest in a more normal position, do you have fat or thin fingers? You would have to bear the brunt of the warranty your self though as it would weaken the frame... and then you could either cut off the bottom of a standard trigger below the magnet or make a whole new trigger.

Doc Nickel or Punisher could do this easily for you if you are states side.

manike

[Panzerr]

Chaotic-
Maybe. I've got a triggernomics on my RT and it's very nice.

Manlike-
That would be perfect. I could still have the benefits of a double trigger, but get a firm grasp on the grip frame. Maybe the trigger itself could be positioned as to allow a finger to slip behind it?

Thordic-
I'm sorry, but I'm kind of limited by the keyboard. I'm not really able to communicate facial expressions and tone of voice as I type. How about this?

[facial expression=sad]
[tone of voice=wishful]
[polite]
I don't care if they have to redesign the trigger frame. I really don't care. I just want a single trigger.
[/polite]

[manike]

Panzerr,

I think you would need a custom trigger making (not that hard) and a small amount of machining to the grip frame (such that it would need annodising after).

The trigger would end up being more raked forward but if you could live with that then I have little doubt it is possible. Next question is if you can afford for a custom house to modify it for you.

How much would it be worth to you?

manike

[manike]

Ok Panzerr I am going to do it to mine...

I hadn't envisaged putting my SFL frame onto the mill because there just isn't much left on it to mill out!

But since I am embarking upon the most custom E-mag Extreme EVER I might as well put my touch on the frame as well. I'll use this as an opportunity to engrave my nick on it also...

I personally prefer double triggers but it's nice to have 'details' like this on such a custom gun.

If it works out I expect you to drop the $1400 on an SFL!

I have no idea what it will cost or how long until I can show you what it looks like (it may be quite a while!)

But I will do it and post pics of here once it is done. At least I will machine my frame, I'm not sure about making triggers... I think it will require a custom trigger. If you have fat fingers it may not work at all...

manike

[Panzerr]

Kewlness. Let me know how it turns out for you.

[manike]

Manik-E-Mag gripframe

Ok so here is how the design is going to look...



I'm a little concerned that the step back for your bottom finger may weaken the frame but I'm going to do it to mine anyway and see how it holds up. The material is still 2mm thick after machining...

You can see I've also put some finger scallops at the front. There are three and from my frame I can actually hold it with three fingers below the trigger guard and have my index finger on the bottom of the trigger. Panzerr, You could do this also with a normal gun anyway and may solve your question with out any mods being required. With mine I will have both options

Oh and there is another subtle modification. A smiley face as the prize for the first person to spot it

manike

[ShinyGuy]

I think you guys are coming down a bit hard on Panzerr just for stating what he wanted. He's telling AGD that there is demand for a single trigger E-mag. It will be up to AGD to decide if there's enough demand to make it worth producing, but it's completely unnecessary to scream at him that its never going to happen and he shouldn't even want that. I agree that it probably isn't cost effective for AGD to make a single trigger E-mag right now but at least Tom knows that someone is interested and he can consider the possibility of a single trigger version if the grip-frame gets redesigned for any other reason.

For the record I too hate double triggers on electros but I can't afford a new E-mag anyway.

[BradPalooza]

Panzerr, are you stirring things up in here? : )
How you doing man?
Jesse keeps saying he'd get an SFL if it had a single trigger too, that and I think he'd need to give a heck of a lot more plasma to afford it! : )
-Brad

[Ov3rmind]

Well, I got bored today, so I made this on Photoshop. It's just to experiment with what it would look like in general. I know that's not really what it would look like, due to technical quirks, but I thought it was kinda interesting: