Tac-One setup question

[Xhero]

Hi, I'm new to the forum. I just bought a Tac-One and it's my first mag. I put a Max Flow regulator on the bottom of the gun. My question: What in your opinion is the best way to hook the tank up to the valve? Right now I have a 90 degree elbow connected to the valve and one to the tank with a steel braided hose in between. I'd like to be able to bleed the excess pressure out of the line and the gun and want it to be durable since I mostly play scenario type paintball. Should I have different fittings in the line? If some of you paintball gurus could help me out I'd appreciate it.

xhero

[Snorkie]

i would put a gas through grip on the gun and run macro line from the asa to the botom of gas through. Then from the top of the gas through to the valve. Also i would not use the max flow regulator on the gun because mags have a built in reg in the vavle assembly and a secondary reg tends to stave the gun of air. Instead use a on/off asa.

[sneakyhacker420]

i think he means that its a max flo tank...


but yea, never dual-reg a mag, its already got a built in regulator