Cocker Dillema

[firebanex]

send the pgp to PPS for the tune up of course. anything from PPS or touched by PPS would be relly cool.

and for your senario use the nelspot and just carry balls around in a pod for it and rock single shot. or break down and spend $5 on a bunch of 10 rd tubes.

[JuggaloDave]

cockers are not guns to buy if your on a budget. and i would sugguest getting the 03, but make sure that is what you want first, i mean, if you have one pump, do you really need a second one? wouldnt you be better off just buyin a snipper than a cocker and converting money wise? do what you want, but i wouldnt let going to that game make you make a hasty decision that you may end up regreating.

[azza]

Just a quick question. Does the scenario game you want to go to rent markers for people with no gear? If they do, just rent a marker and save ur money for something decent.

Just my $0.02NZD
Azza

[OysterBoy]

It wouldnt really be saving with the rates they charge on rental gear, plus I had my mind set on playing pump. I've decided to send the PGP in for upgrade, and I will be doing some home-mods to the nelspot. Namely, cutting the feed tube down to the actual feedhole, because depending on the number of balls in the tube you have to cock and tilt a certain way. It should act more like a phantom once I am finished. The feedtube will then be elongated and tilted up a little bit to get back the lost space, and a vert feedneck will go right over top of the breech, with a cork stopper to switch between vert and stock class. Should end up costing about 150 CDN for the PGP tune up, and I'd guess 20 CAD for the Nelspot's mods.

Thanks guys.

[DiSoRdeR]

Let us know how it goes, pics wouldnt hurt

[Thermus]

It wouldnt really be saving with the rates they charge on rental gear, plus I had my mind set on playing pump. I've decided to send the PGP in for upgrade, and I will be doing some home-mods to the nelspot. Namely, cutting the feed tube down to the actual feedhole, because depending on the number of balls in the tube you have to cock and tilt a certain way. It should act more like a phantom once I am finished. The feedtube will then be elongated and tilted up a little bit to get back the lost space, and a vert feedneck will go right over top of the breech, with a cork stopper to switch between vert and stock class. Should end up costing about 150 CDN for the PGP tune up, and I'd guess 20 CAD for the Nelspot's mods.

Thanks guys.

Geez, you could buy a working PGP for less than that.

[OysterBoy]

Wheres the fun in that? Id rather have a smooth rocking PGP then 1 that works mediocre and the other not at all.