Halo vs. 12v revvy w/ warp

[Maghappy]

What is better like the title says and post why. heres a poll so lets vote! :)

[Bonx0007]

Halo + Warp = unstoppable rof

[Cha0tic]

the awrp is only as fast as the hopper on top of it. that is the warps only downfall. so i would say HALO. or maybe a warp with HALO....

[headcase]

Maybe it's just me, but I didn't buy a warp because of the ROF increase, I got it because it changes the profile of the marker.

[billmi]

Originally posted by Cha0tic
the awrp is only as fast as the hopper on top of it. that is the warps only downfall. so i would say HALO. or maybe a warp with HALO....

However, most hoppers can deliver paint faster when they aren't faced with the start/stop action they get when hooked on a paintgun. The gap in the ball stack between a hopper and warp can get longer, and even extend into the warp without slowing the output of the warp to the paintgun.

In the hopper speed comparison test for WARPIG, I was able to get faster speeds out of a Revy on a Warp than a Revy straight on the gun. And while I used 10 shot bursts for the tests, I ran a 40 shot burst on the warp set up, to see if the gap would get through the wheel (i.e. if only the 8 or so balls in the warp could be fed at the Warp's rate) and it ran just fine.

See you on the field,
-Bill Mill;s

[ben_JD]

H.A.L.O. on a warp. It's only money.

[hitech]

Originally posted by billmi
However, most hoppers can deliver paint faster when they aren't faced with the start/stop action they get when hooked on a paintgun...
In the hopper speed comparison test for WARPIG...I ran a 40 shot burst on the warp set up... and it ran just fine.

I think that says it all. "Real" world testing.

[Maghappy]

i got my warp 2 days ago for 2 reasons, 1-so i dont outshoot my revy and 2-lower profile. i just wnated to see everyones inputs and ideas. cuz i would definiately go warp and revvy cuz noone will outshoot that. spending money on halo and warp is a waste of moeny. that would be like 300 and sum dollars. KRIKEY! lol well i am happy as a clam with my warp and revvy

[XspyX]

Lets see a 12v and a warp keep up with the halo's 16-18bps

[Dog]

12volt with some work on the board

a local airsmith did some work on a revvy and he now has it feeding above 15bps it is sweet. it only cost 20 dollors.

[PAINTBALLA01]

i would go with the warp and 12 vlt it has enough and it takes the hopper off the top. and if you want more rof but the x board

[RaV3n_Pa1ntba||]

well i have one of the best revvys you can get...without a warp. Its a Pre-Bre Revvy...with 15v mod...with Sandridges wireless intellifeed board....and it has a JmJ 6 Blad Impellar. I never skip....never out shoot my hopper. And boy it was a lot cheaper than a halo. It probably feeds a good concistant 16 bps..which is fine cause i cant get no where near that on my mag. But still my revvy plus a warpfeed would be my pick over just a halo.

[mountaindud]

HALO on WARP

HALO on a Warp Feed would be the best just because it would still keep your hopper to the side. Besides the warp is only as fast as your loader.

[Cha0tic]

raven, stick 150 balls into your hopper and see how long it takes to empty it. i want to see exactly how fast that thing is feeding. doesn't the 15 volts run the battery out kinda quick?

[RaV3n_Pa1ntba||]

no....because with the sandrige board...Battery life is extended 400% over a regular viewloader. Since i have the 15v mod i probably am only getting about 355% but its a big increase. I have no paint left...i shot it all today messing with my backup mag. And i dont have a stopwatch. But when i go pick up my new barrel i will get a baggy of 200 balls and search for a stop watch or sometin. Im eager though.