Flatline Question

[rpm07]

Has any used a AGD Flatline on a low pressure gun.
I am picking up a Timmy and would like to use my 68 4500 Flatline but not sure if it will work

[ghideon]

Not too familiar with Timmies, but if the reg on the Timmie can handle the output of the Flatline, you're fine. IIRC, there's only a few regs out there that absolutely need to be fed from LP tanks (450psi ish).

Then the reg will bring the pressure down to something the Timmie can use.

[govnamac]

Did you sell the emag?

[FSU_Paintball]

It should work fine.

[sneakyhacker420]

because just about any electro-pneumatic gun out there needs a secondary reg, yes it will work, set the flatline output to about 600-700 to feed the vert reg on the gun


i've ran my flatty on numerous cockers, e-cockers, a timmy, and an angel so far (besides mags) and have never had a problem

[Dayspring]

It works just fine. I use my Flatline on my Timmy as well. I leave it at 800psi input. The Torp (or whatever reg you want) will do the rest.

[rpm07]

Thanks guys for all the help