Does it Look Pretty?

[rikkter]

how in the world does that blow your noid?
theres no suction in the bolt in the firing operation(least i dont think there is) for the cheese to even get drawn back and into the valve area. let alone the solenoid

[RogueFactoryKid]

All i know is i have my thor reg and i set it down to about 75 and layed it down the feed tube fired about 3 or 4 times then the bolt jammed forward and after that the solenoid stuck, the cheese stick was still in perfect package condition though
And im happy my 80 dollar *F* Up made some of you laugh lol, it made all my friends drop nut laughing

[RogueFactoryKid]

About how much to replace the solenoid with a humphrey?

[rikkter]

wait. have you even tried to fire it since it happend? a new noid shoul dbe like 50+ i assume. i have to send my viking and excal in to them (ripped wire out of excal noid and vik leaks weird when gassing up)

are you *sure* the noid is blown?

[AR55 MtM]

The gun is nice but it isn't pretty.

[RogueFactoryKid]

Well when i click the trigger it takes about a 1/2 second-second for the solenoid to open/close

[rikkter]

what kind of board is it? sure you didnt get the modes switched up on accident? maybe dead battery?

[RogueFactoryKid]

Nelson Board, Battery has been checked, now leaks out gripframe AKA Solenoid?

[rikkter]

hmm possibly. but stop listening to me now because i dont know anything about the nelson boards

mine leaks out of the grip frame area when i gas it up but i have to shoot it to get it to stop when gassing up. then ti works fine.
i know that its not right so, but dont wanna send it in right now (league tourny every 4 weeks)

but good luck with your gun

[AzrealDarkmoonZ]

Wait a second. Thor Reg? Why isn't the more than capable Sidewinder handling the job? How did you break the noid? Have you checked the noid retention screws in the tray to make sure they are tight, and maybe the gasket/orings on the noid. Or maybe the Nelson board just died, ie not that uncommon.

Az

[RogueFactoryKid]

How did the nelson Board "Die" i havent changed anything on it, the gun still shoots but the solenoid hangs open shooting air down the barrel for half a second.

[ilikePB]

Nelson boards are known to go dumb for no apparent reason...