autococker question

[tippmannsniper-]

if you change the frame on an autococker like the day you get it will you have to get it retimed like if you get an o4 vert and then install a kapp reflex ll will it have to be retimed

[Automaggot68]

Im sure Im wrong, but I thought it has to be re timed if you mess with the three way?

[LeatherPants]

Yes. You will have to retime it. If you change a frame you also alter the trigger actuation point on the 3 way as well as the sear and hammer lug actuation.

[teufelhunden]

You'd wanna retime it out of the box anyway. Too spaced out, unless Worr changed their standard timing for the 04 line.

[Automaggot68]

Yes. You will have to retime it. If you change a frame you also alter the trigger actuation point on the 3 way as well as the sear and hammer lug actuation.

Nice post, bro.
I have just been pwn3d.

[wispaintstyle]

the 04 vert was better than stock cockers have been is the past. It still can be tweaked, however.

[LeatherPants]

Nice post, bro.
I have just been pwn3d.

No because you are right too. Changing the frame in a way you are messing with the 3 way. Or atleast the 3 way has to be touched again. So don't worry I don't pwn you ahah.