What's you Mag setup?

[Kraut Boy]

1 - What air source
2 - barrel
3 - x-chamber
4 - stab
5 - 1 - 10 performance rating (consistancy and long range accuracy) compared to a crazy ass perfect gun (Angel?)

[WaRpEd_MaG]

1 - PMI 3000psi air tank
2 - 10" Dye Alum, 14" PMI Ceramic
3 - no Expantion Chamber (why would i have one?)
4 - WTF is stab?
5 - preformence, great
I also have a ReTro kit.

[blitz134]

1. 68 ci 3k psi max flow
2. 12 Lapco AutoSpirit, 16 sp aa, 8 taso power barrel
3. no x chamber
4. i think he might mean stabalizer, dont have one of those
5. really great performance already, but as soon as teh retro gets in thursday its all good

[Ni cD]

1 - 68ci Melee. Great tank!

2 - 12" SP All American, SP Progressive (I only use the All American).

3 - No expansion chamber...

4 - I don't have an inline regulator (I assume that's what you mean).

5 - My 'Mag is fairly consistent, but as for long range accuracy...I couldn't tell you - I play front and have never tested it out long range. I'll give it a, umm, 7?

[Kraut Boy]

1 - CO2! 20oz Anti-siphoned
2 - Lapco BIG SHOT
3 - ACI 6 Stage
4 - Side Line Palmer Stabilizer
5 - Considering I use CO2, its great - just get a good paint match and its accurate as hell too

[magc68]

1- flatline 68ci
2- most of the time: 12" boomstick or 14" SPAA stainless base
3- gas through forgrip, no exp
4- air line from tank directly to valve
5- 9 out of 10 for my RT PRO. i can shoot as acurate as an angel and i can shoot faster. accurate at long range and short. the angel is not the best gun out there. mine is. haha jk. if u set up a gun right u will shoot as good or better than any other gun out there.

[921logan]

1. 90ci 4500 NitroDuck
2. RT Pro stock right now
3. not needed NO CO2 here
4. on tank reg. direct to rt valve
5. I love the performance of this gun. Well balanced with D/F but kinda heavy overall. I think that the stock barrel is fair with the feild paint but long range needs improvement. 12" boomstick & 14" SS BOA in the mail, Thanks eBAY. Rating in present configuration = 7.75


------------------
Automag RT Pro chrome P/F
90ci nitro duck
12v rev.
kapp chrome drop zone2

[Mojojojo]

1-- 24 oz co2
2-- 14 inch eliminator, and 8in mini
3-expansion chamber
4--none
5-- i rate mine at about 9...because latly i think my mag as been screwing me over...i can fix it and shot it but when a game comes i can't even play the whole day with it...IT'S A CONSPIRACY!!!!

mojojojo

------------------
"Blood is foul, The Flesh dross. My Ascendance thirsts for life itself"

[Supafly]

1. 68/3000 fiber wrapped crossfire
2. Blue 13.5 inch CP
3. ACI Sub Zero 4 Stage - Blue
4. Stabilizer??? - i dont have one
5. 7.9 - it would be like an awesome gun but it just breaks too much paint

[e_magman]

1- 68ci Flatline
2- 14" J&J Cermaic
3- nothin
4- nothin
5- As far as consistancy? About a 7 or so. Accuracy is just a matter of the finding the right paint to fit my barrel.

[SkApAiNtMaG]

1- 88ci fiber Wrapped Crossfire( works well enough for me, i have no drop off)
2- 14" AA and love it.
3- I dont need one.
4- i dont need one.
5- Doesnt everybody love my gun? If you saw it i know you would.It looks great. For some reasdon it shoots great with Nelsplat. Close range and long range, its very consistent and doesnt curve off at long distance. I give my gun an easily earned 9...

------------------
Tricked SmartMag
14" All American
Smart Valve, Internal Milling, skillz...
Our team would love to play anyone in the Jacksonville, FL area!! Email me at [email protected]

[Wahooka]

1 - Apocalypse 3000psi 114cu
2 - Lapco or CP
3 - No x-chamber
4 - No stab
5 - Just got new extended nose bolt and parabolic PF plug. Rating was about 8 before since i got the rare chop ocassionaly with old bolt and PF plug. I would probably say 9 now with new parts. 10 when I get ReTro.
Dead Nutz accurate with Lapco AutoSpirit and marbs or Pro ball. Also accurate with Lapco Bigshot and RP premiums, big ball and Zap. My CP barrel is new and untested.

[Bigdaddy]

1.114 ci bulldog
2. reactor valve (it works good in my mag,I know its not supposed to do anything for a mag but, it works better for my gun than the stock does, why I do not know)
3. foregrip from skanline paintball
4. classic feed mag
5. dye double trigger and frame and it works flawlessly, outstanding trigger pull
6. 9-volt revy

[Matt Crawford]

1- PMI 88ci 4500psi
2-DYE alluminum 14"
3-No expansion chamber
4-No stabelizer
5-Perfect.I have a hr body, and I'm gettin a warp.It shoots great.I would rather shoot this than any other gun in tha world.I have had no breaks as of yet.it is 2 1/2 years old.

[Bonx0007]

1. 68cu 3000psi PE steel tank
2. 14" Sp freak system or 8" Sp venturi Barrel
3. No ex. chamber
4. No stab
5. I like the reliable firing rate I have. My warp will look cool on it and I hope my game play will get even better from having a smaller profile(better to shoot Minimag4me with te he )