Proud Owner Of My First Mag

[professor_chaos]

Well the mail man was nice to me today and brought me my red rt custom. I am only having one problem, I messed around with it and finally got it to stop leaking but it doesn't always recock when I try to fire fast. I tried a varitey of shims in it and it finally got better with all 5 shims in. Should I try the next size carrier and start trying different shims? But anyways here it is, hope you like.

http://www.jayloo.com/files/pics/9000/106_0020_9819_rs.JPG

http://www.jayloo.com/files/pics/9000/106_0022_7005_rs.JPG

http://www.jayloo.com/files/pics/9000/106_0024_6730_rs.JPG

And of course this isn't the finished product I will be adding some frymaker grips, drop, and probably a dye forgrip. Thanks for your interest. Must also thank Joe over at WWA, thanks man you rock.

[DiSoRdeR]

Very nice looking. How do you like your Y-Grip? Been thinking about getting one.

[Rift]

sweet gun!!!! witht the lvl 10 you can try using the bigest carrier that dosent leak and then work your way up with the shimms, id recomend the medium spring but thats up too you. After using hte gun a bit your gonna have to go down in carrier size because the oring is breaking in. Also whats your input pressure ?

[warbeak2099]

Oil the white carrier o-ring too. Oil the whole thing and shoot about 20 shots through iut (w/o barrel of course). If it's still leaking, go down a carrier.
Oh, and awesome setup. WWA I presume by the roller trigger. Very nice.

[professor_chaos]

Disorder: I really like the y-grip and with the roller trigger I got it to probably around 10-12 bps before I had recocking problems. You should try one if someone around has one, imo they are very comfy.

Rift: I'll try that once I get some more air. Right now my input pressure is 800-850 preset tank, however I will be getting a dynaflow shortly.

[professor_chaos]

I'm assuming that the more lines on the carrier the bigger it is?

[frontrunner]

5 seems liek alot but i have 4 in my retro,i change your carrier and that should do it. it may take a bit of tunnig but the its worth it good luck

[Chronobreak]

And of course this isn't the finished product I will be adding some frymaker grips, drop, and probably a dye forgrip. Thanks for your interest. Must also thank Joe over at WWA, thanks man you rock.

thats what i like to hear may i also suggest a 15* asa they go NCIE with the y-grip
glad you like the roller i LVOE mine

as for teh lvlX the ebst way to tune it is red spring 2 shims and largest carrier that wont work then go from there(seems to work good for most people)

nice mag

[tony3]

Point of a roller trigger with a mech gun?

[Chronobreak]

Point of a roller trigger with a mech gun?

to roll the trigger...works alot better with ult and seems to work even ebtter with the y-grip angle

[tony3]

Is the trigger pull really light enough to do it without short stroking? I've tried a ult mag and it definitely seems like you can do it.

[Chronobreak]

light enought to roll? i can roll it with the stock on/off althoguh sometimes it can hurt a bit if you do it wrong took me awhile but i got the hang of it. a heavier bouncier ult would work better as well but a properly setup one will do it just as good but takes some work.


oh....and nice gun again

[atm743]

Well the mail man was nice to me today and brought me my red rt custom. I am only having one problem, I messed around with it and finally got it to stop leaking but it doesn't always recock when I try to fire fast. I tried a varitey of shims in it and it finally got better with all 5 shims in. Should I try the next size carrier and start trying different shims? But anyways here it is, hope you like. .

i had the same problem with the level 10 when i got a new x valve when i had a mech mag. you have to brake in the level 10 more or use a smaller spacer. well anyway very nice mag!! where did you find a red x-valve with the x not pointing up???

[Chronobreak]

i had the same problem with the level 10 when i got a new x valve when i had a mech mag. you have to brake in the level 10 more or use a smaller spacer. well anyway very nice mag!! where did you find a red x-valve with the x not pointing up???

im gonna lay off this thread after this....agd fixed them no more 10 o clock valves or w/e thyr all sitting that way

[professor_chaos]

[QUOTE=wantamag]thats what i like to hear may i also suggest a 15* asa they go NCIE with the y-grip [QUOTE]

Yea, I plan on getting a 15 * asa just forgot to mention it. Also, ATM743, I got this gun from www.whitewolfairsmithing.com I really didn't notice the x valve being different. Is it?