I just installed my superbolt after following the instructions by boiling it for 10 minutes and letting it cool slowley. Looks like that works because I don't have any problems so far. I have dry fired it about 1000+ times and fired about 700 paintball through it. I did have a few breaks but the paint I was using was marginable at best.
-
" That's it, end of story Period, P.E.Y????" Shaq O'neil -
I got some 3/16" weather stripping, and am going to try the foamie thing tonight... I'll post my results in the main forum.-Campbell "aNtHrAx323" Krueger
http://www.h2overclocking.com
http://www.h2oc.net
"If you are distressed by anything external, the pain is not due to the thing itself, but to your estimate of it; and this you have the power to revoke at any moment." -(dunno)Comment
-
i just boiled my bolt, its in the process of cooling. I have no air but i will post results in a few days.-Minimag Body HR
-Retro Valve
-Z grip with extender
-12V X-Boarded Revvy
-6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
-68/3000 FlatlineComment
-
well I just finished boiling my bolt. After it was at room temperature it had expanded to much to get the bolt spring on. I waited about 4 hours and I could just about put the bolt spring on but it was a tight fit. Just to make sure the sleeve wouldn't get worn out when in the gun I depressed the spring several times around the bolt to see if it would work. I only got to fir about 20 shots before I ran out of air....will do further testing tomorrow.
Taking mags apart is fun, its even more fun when you don't know what you're doingComment
-
What is an SS bolt?Originally posted by BlackVCG
I believe what AGD will do is come out with hardnose and foamie style sleeves for the superbolt. So in essence, it will be just like the SS bolt. All you'll have to do is cut off the current sleeve and then slide on the new foamie/foamieless sleeve.Comment
-
oh, and do you guys expect the superbolt to be fixed any time soon, i noticed you don't sell them on your site anymore and I want to get one when you get it fixed. when will you guys expect to rerelease it? or is it too soon to tell...Comment
-
SS = Stainless SteelOriginally posted by strongboy2005
What is an SS bolt?2003 SuperBowl Champions!, THE New England Patriots!
He was constantly reminded of how startlingly different a place the world was when viewed from a point only three feet to the left.
My FeedbackComment
-
If I order a bolt now, will it be the correct length and have a foamie attached? I really want one, to totally complete my setup."I may be half human, but Im all Woman"
Retro PF Mag
Lvl 10
Intelliframe
DYE 12" aluminum'
KAPP foregrip
68/3k Flatline
KAPP DZ2
1987 VW Scirocco 16v
GOOD TRADERS: Alf, Snakestang
BAD: iNeedaN2tank!Comment
-
Well I did this to my new SFL superbolt and the delrin appears to have swelled a bit. The end was always a little fatter but this was'nt allowing movement with the spring. I had to remove a little material to allow it to move freely again. The delrin sleeve also spins pretty easily. I'll find out in a few days if the bolt is still usable.Comment
-
Hey,is AGD goin to fix the super bolt problem or just tell us how to fix it?I dont mean to sound rude.its just the way the words look when typed.ALSO,When agd does fix the super bolt,Is it goin to come with a foamie on it,cuz every one is talkin bout puttin foamie's on their super bolt.Another thing,any one know when the "fixed" super bolts are going to be coming out?mainly cuz if its gunna be a while,i might go ahead and buy most of my other upgrades.Comment
-
that's the same thing i want to know, when is it gonna be rereleased???? as in, when are they gonna be back on the agd store?Comment
Comment