Magnet viking trigg

[RTDynaflow]

Bored while waiting for my viking to get back from anno, I decided to mess around with my stock trigger.... What ya think?

Anyone have this mod? Anyway, there is some more info on it in the dealers section. If you want one check that out.

Finally some pics.

[magmanl337]

SWEET! will it work tho? lol. my team owns currently 4 vikings,...hehe

[RTDynaflow]

yes. Have you ever taken the gripframe off your viking? There is a steel screw that lines up your tray w/ the frame ... well I *think* it is meant to adjust forward travel however mine didn't go down that far =/... move that up and down to adjust the pull weight.

Check out the dealers forum in the BST. There is a lot more info on it there. Also working on a reverse polarity magnetic trigger. When I get my viking back next week I will post how that worked out.

[gc82000]

ME like... Cool enginuity.

[TSovern]

It will work if you like that kind of pull. If you like you trigger forward you'll need to countersink the magnet, your trigger is gonna be close to the grip as is.

[RTDynaflow]

It will work if you like that kind of pull. If you like you trigger forward you'll need to countersink the magnet, your trigger is gonna be close to the grip as is.

I hear ya. And I thought of that as well.... there are 2 magnets. One in countersunk into the trigger and you get a second one incase you want some more room to walk. Second magnet just sits on top. They are pretty strong magnets, so I doubt it will be falling off. {notice the last pic, you can see the magnet that is drilled into the trigger}

Nate

[RTDynaflow]

Ok, I hit the field yesterday and brought the trigger along to try out on some vikings. It rocked...especially in a delrin trigger. No one could get it to bounce on a bounce test... but when you got into it, you could tell it was adding shots. Thought I would share.

BTW have an adjustable magnetic ball detents in the work for the 04s....

[RogueFactoryKid]

Wanna make me one ill give you cash money for it

[RTDynaflow]

Sure.. there is a post in te dealers section on it. I can't put a price on this thread, but you can PM me or check out the dealer section.

At the moment I don't have any triggers to do this on and then sell. Just my proto. So, for now I am just taking your trigger in, modding it, and shipping it back out next/same day. Check out the dealers section BST, or PM me. If a lot of people want it, I will do some sort of exchange or buy out right.

As soon as I get my viking back from DC I will finish up the magnetic detents. I am hoping for some good results, as kileaukids seem to be a huge hit.

Nate

[Barfly]

haha, you stole my idea, j/k. Actually I am going to do the same thing to my viking, just put in a 25g switch too. I have like 200 of the small neodymium magnets I bought off ebay, they actually are small enough to fit in the set screw hole. I bought some 2-ton epoxy too, so hopefully that will be strong enough to hold the magnet in.

[RTDynaflow]

haha, you stole my idea, j/k. Actually I am going to do the same thing to my viking, just put in a 25g switch too. I have like 200 of the small neodymium magnets I bought off ebay, they actually are small enough to fit in the set screw hole. I bought some 2-ton epoxy too, so hopefully that will be strong enough to hold the magnet in.

I used super glue, works fine. However, I drilled the tang to a press fit. Super glue was just a little extra. I am still trying to figure out a way to utilize a reverse polarity magnet. Also as soon as I get my viking back, I will let ya guys know how the reverse polarity ball detents work. Anyone have problems with theirs double feeding w/ the v35? Or breaking down? Haven't had my viking long enough to comment on either, but I figure it is like every other ball detent. Plus it would be nice to be able to adjust your detents to your feeding system.


Nate