need animations of markers and how they work

[personman]

What do these ups do??

The One Kit: Turns the spyder into an electropneumatic marker. It works just like the BKO after this conversion. Spring returned ram.

Spudnuk'l Bolt: I'm pretty sure this is an anti-chop bolt. It has a spring on it so when it hits a half feeded ball, the spring will just compress and not chop it.

NW slideder: I think its similar to the 'rocket cock' system for tippmanns. It eliminates the cocking rod going back and fourth and hitting you in the face (you dont need a beaver tail)

Eclipse QEV: Um.. you cant put one of these on a spyder.

T-Board: Its a replacement electronics board and if I recall correctly, anti chop eyes come with it and it has a high ROF cap.

Here is how a spyder works:

[Beemer]

coool

Thanks Man.........................Person

Thanks PersonMan

[slade]

The One Kit

Spudnuk'l Bolt

NW slideder

Eclipse QEV

T-Board

a few things to add/change in personman's list:

the one kit: what he said is correct, but i think it is more like a timmy than a bko. its made by dragun, not exactly high quality.
spudnuk'l bolt: incorrect. it is not an anti-chop bolt, its a delrin (well they call it nylatron...) bolt. not very well known. I had one in my piranha when i had it, highly recomended. look at their site: http://www.spudnukl.com/
NW slideder: no idea whatsoever, ill take personman's word for it.
QEV's: yeah, those are for cockers.
T-Board: replacement board, has eyes and is very fast. i think it comes with a 25 gram microswitch, but i may be mistaken.

[meshaq]

i think the QEV can be put on The One kit

[Meph]

Hmmm, seems there are cocker, automag, tippmann, spyder, pumps, shocker, matrices.... what marker hasn't been animated yet?


Are there any that need to be done? Trying to think what's left that I can actually do, that hasn't at least been done yet.

[Beemer]

Thanks

Thanks for the help

Does this QEV work on the spyder or not. 2 say no 1 says yes.
What the heck is it and what does it do??????????


I think I need to tell him to forget all the bs and just send him an RT Custom for his B-Day



Thanks again

Peace Out
Beemer

[Meph]

QEV = Quick Exhaust Valve.

You see those little hose fittings on either end of the autococker ram? Yeah it replaces those.

So if your Spyder doesn't have any of those type of fittings then don't bother worrying about QEV's. It makes these little guys go more zoomer.

[slade]

Hmmm, seems there are cocker, automag, tippmann, spyder, pumps, shocker, matrices.... what marker hasn't been animated yet?.

cyborg. I really know nothing on their operation; ive never seen a diagram or good explanation, and ive heard people say that it was based off of a tribal and others argue that it was built from the ground up.

[FallNAngel]

cyborg. I really know nothing on their operation; ive never seen a diagram or good explanation, and ive heard people say that it was based off of a tribal and others argue that it was built from the ground up.

Cyborgs are basically a stacked tube electropneumatic gun. They operate just as an Angel or Timmy would, just slight differences (piston & hammer is one piece, etc) I believe the pics I have of my old one disassembled are at: http://fallnangel.free.fr/Cyborg

[slade]

Cyborgs are basically a stacked tube electropneumatic gun. They operate just as an Angel or Timmy would, just slight differences (piston & hammer is one piece, etc) I believe the pics I have of my old one disassembled are at: http://fallnangel.free.fr/Cyborg

so much for it being developed from the ground up . it looks like there are basically 4 electronic marker designs, with many variations of them: 2 or 3 tube electropneumatic, like an angel, bushmaster, impulse, timmy, borg, etc. or a spool valve system, such as matrices, 03 shockers and the isis, a standard sear-tripper, and then the freestyle... but then again the freestyle is basically an electropneumatic mag, and is very similar to a spool valve (or is it a spool valve?)

[FallNAngel]

so much for it being developed from the ground up . it looks like there are basically 4 electronic marker designs, with many variations of them: 2 or 3 tube electropneumatic, like an angel, bushmaster, impulse, timmy, borg, etc. or a spool valve system, such as matrices, 03 shockers and the isis, a standard sear-tripper, and then the freestyle... but then again the freestyle is basically an electropneumatic mag, and is very similar to a spool valve (or is it a spool valve?)

Yep, there basically are only a few designs for the most part. The Freestyle is more of an electronic Desert Fox, but it's a blow-forward design, not a spool valve.

[DiRTyBuNNy]

Hmmm, seems there are cocker, automag, tippmann, spyder, pumps, shocker, matrices.... what marker hasn't been animated yet?


Are there any that need to be done? Trying to think what's left that I can actually do, that hasn't at least been done yet.

Viking!