Tank removal

[skibum]

Just got a mag, Retro valve, lvl10, intelliframe. Picked up a Crossfire 70/4500 a couple days ago. When I remove pressure from the mag after firing by turning the on/off valve to off, there's 3 full shots left and 1 "half-shot"....meaning I pull the trigger the 4th time and it stays stuck in. Should I be leaving those last few shots in the marker or should I fire it out like I've been doing? Basically, I'm wondering if it's BAD for the gun to do that.

Thx.

[Creative Mayhem]

This shouldn't be a problem at all. Just make sure to take your time if you plan on taking the valve out after removing the tank, there can be some residual pressure left in the on/off. The on/off pins have been know to go for a little flight under pressure as well as bending the on/off pin.

Welcome to the mag family.

[Link44]

and i think that "half shot" happens with my mag too. the sear still has preasure left in it so it feels like its gonna fire but doesn't

[skibum]

Cool, thanks guys